9/6/2011 1:56 PM | |
Posts: 672 Rating: (56) |
Hi, Encoder can be a problem if you are not getting the reference pulse. Can you perform spindle positioning. i.e. SPOS = 0 Pee |
9/7/2011 2:03 PM | |
Posts: 2964 Rating: (478)
|
Hello.... Kindly check whether your machine manufacturer have kept some screen where you can reference the axis? Regards, Prakash |
9/8/2011 10:21 AM | |
Posts: 21 Rating: (0) |
No, i command SPOS=0 s4 runs and the ALARM 22051: Channel !spindle s4/c4 reference mark not found appers... Please tell me whnat next i should do |
9/8/2011 10:25 AM | |
Posts: 21 Rating: (0) |
i haveprogrammed the spindle rpm in mda, actual and set rpm are same.. please reply |
9/9/2011 11:21 AM | |
Posts: 21 Rating: (0) |
i have seen there is only one encoder mounted on the spindle ERM 180 and there is not second ncoder.. Regards |
Follow us on