Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TIA Portal V15

Created by: VVago at: 6/1/2014 4:07 PM (22 Replies)

Rating (0)

Thanks 2

23 Entries

Entries per page: 10 | 20 | all

6/1/2014 4:07 PM
VVago Posts: 784 Rating: (50)	Hello, Now,TIA Portal V15 softwareavailable in Siemens agents and distributers. Advantages: 1-Successor for TIA V11,TIA V12 and TIA V13 2-Successor for Simatic Manager V5.5 3- Contains all HWs for all successor software. 4-Open projects programmed from V 5.5 5-Can do Migration into comfort panels. 6-All options in V5.5 contains in TIA V15 Sorry,this is a dream may be come true. Best regards........
VVago Posts: 784 Rating: (50)	Last edited by: Wago at: 6/1/2014 4:13 PM
Suggestion Quote Answer

6/1/2014 4:13 PM
0_Einstein Diamond Member Joined: 7/7/2010 Last visit: 1/23/2021 Posts: 9970 Rating: (1653)	Wago Hello, Now,TIA Portal V15 softwareavailable in Siemens agents and distributers. Advantages: 1-Successor for TIA V11,TIA V12 and TIA V13 2-Successor for Simatic Manager V5.5 3- Contains all HWs for all successor software. 4-Open projects programmed from V 5.5 5-Can do Migration into comfort panels. 6-All options in V5.5 contains in TIA V15 Sorry,this is a dream may be a true. Best regards........ You are very optimistic. I think if you are lucky it would be V20, but even then, #3 and #6 would be missing (sadly, probably on purpose). I think the fact that legacy products are not supported tells you that Siemens decided to create new CPU/PLC hardware and firmware configurations that are never future-proof - unlike many competitors...
	science guy
Suggestion Quote Answer

6/1/2014 6:37 PM
VVago Posts: 784 Rating: (50)	huggy_d1 You are very optimistic. I think if you are lucky it would be V20, but even then, #3 and #6 would be missing (sadly, probably on purpose). I think the fact that legacy products are not supported tells you that Siemens decided to create new CPU/PLC hardware and firmware configurations that are never future-proof - unlike many competitors... Optimistic and dream may be come true
VVago Posts: 784 Rating: (50)
Suggestion Quote Answer

6/1/2014 6:38 PM
Thangabali Posts: 21 Rating: (1)	Wago Hello, 2-Successor for Simatic Manager V5.5 Indeed a dream!! TIA, a successor of Step 7. Actually I used to of Step 7 so much (Specially Shortcuts) that sometime I got annoyed with TIA.
Thangabali Posts: 21 Rating: (1)
Suggestion Quote Answer

6/1/2014 7:03 PM
VVago Posts: 784 Rating: (50)	Thangabali Wago Hello, 2-Successor for Simatic Manager V5.5 Indeed a dream!! TIA, a successor of Step 7. Actually I used to of Step 7 so much (Specially Shortcuts) that sometime I got annoyed with TIA. Shortcut is available in TIA V15
VVago Posts: 784 Rating: (50)
Suggestion Quote Answer

6/1/2014 7:05 PM
IBN-Service Posts: 8946 Rating: (988)	Wago Thangabali Wago Hello, 2-Successor for Simatic Manager V5.5 Indeed a dream!! TIA, a successor of Step 7. Actually I used to of Step 7 so much (Specially Shortcuts) that sometime I got annoyed with TIA. Shortcut is available in TIA V15 But it changed completely from Step7 classic...
IBN-Service Posts: 8946 Rating: (988)
Suggestion Quote Answer

6/1/2014 7:12 PM
VVago Posts: 784 Rating: (50)	IBN-Service Wago Thangabali Wago Hello, 2-Successor for Simatic Manager V5.5 Indeed a dream!! TIA, a successor of Step 7. Actually I used to of Step 7 so much (Specially Shortcuts) that sometime I got annoyed with TIA. Shortcut is available in TIA V15 But it changed completely from Step7 classic... This is thesuccess in TIA V15
VVago Posts: 784 Rating: (50)
Suggestion Quote Answer

6/1/2014 7:14 PM
javed88 Bronze Member Joined: 7/19/2011 Last visit: 1/13/2021 Posts: 259 Rating: (4)	Dear Sir kindly tell what will be the additional features in Wincc Proffessional V15 as compared to the currently using V11/V12/V13 .
	JAVED AKHTAR
Suggestion Quote Answer

6/1/2014 7:15 PM
IBN-Service Posts: 8946 Rating: (988)	Wago IBN-Service Wago Thangabali Wago Hello, 2-Successor for Simatic Manager V5.5 Indeed a dream!! TIA, a successor of Step 7. Actually I used to of Step 7 so much (Specially Shortcuts) that sometime I got annoyed with TIA. Shortcut is available in TIA V15 But it changed completely from Step7 classic... This is thesuccess in TIA V15 TIA V150? Than I rest in my cool dark grave and no TIA will harm me anymore...
IBN-Service Posts: 8946 Rating: (988)
Suggestion Quote Answer

6/1/2014 7:16 PM
IBN-Service Posts: 8946 Rating: (988)	javed88 Dear Sir kindly tell what will be the additional features in Wincc Proffessional V15 as compared to the currently using V11/V12/V13 . THERE IS NO TIA V15 NOW!
IBN-Service Posts: 8946 Rating: (988)
Suggestion Quote Answer

6/1/2014 7:17 PM
VVago Posts: 784 Rating: (50)	javed88 Dear Sir kindly tell what will be the additional features in Wincc Proffessional V15 as compared to the currently using V11/V12/V13 . Migration and can open previous versions
VVago Posts: 784 Rating: (50)
Suggestion Quote Answer

6/1/2014 7:20 PM
VVago Posts: 784 Rating: (50)	IBN-Service javed88 Dear Sir kindly tell what will be the additional features in Wincc Proffessional V15 as compared to the currently using V11/V12/V13 . THERE IS NO TIA V15 NOW! TIA V15 dream may be come true
VVago Posts: 784 Rating: (50)
Suggestion Quote Answer

6/1/2014 7:23 PM
IBN-Service Posts: 8946 Rating: (988)	Wago IBN-Service javed88 Dear Sir kindly tell what will be the additional features in Wincc Proffessional V15 as compared to the currently using V11/V12/V13 . THERE IS NO TIA V15 NOW! TIA V15 dream may be come true Yes. And the TITANIC was unsinkable. There will be TIA V15 but NOdreams will come true.
IBN-Service Posts: 8946 Rating: (988)
Suggestion Quote Answer

6/1/2014 7:26 PM
VVago Posts: 784 Rating: (50)	IBN-Service Wago IBN-Service javed88 Dear Sir kindly tell what will be the additional features in Wincc Proffessional V15 as compared to the currently using V11/V12/V13 . THERE IS NO TIA V15 NOW! TIA V15 dream may be come true Yes. And the TITANIC was unsinkable. There will be TIA V15 but NOdreams will come true. Be optimistic
VVago Posts: 784 Rating: (50)
Suggestion Quote Answer

6/1/2014 8:15 PM
Navnag Platinum Member Joined: 11/21/2007 Last visit: 1/11/2021 Posts: 2320 Rating: (298)	Wago IBN-Service javed88 Dear Sir kindly tell what will be the additional features in Wincc Proffessional V15 as compared to the currently using V11/V12/V13 . THERE IS NO TIA V15 NOW! TIA V15 dream may be come true It is said Once Bitten Twice Shy .... We have been bitten Three times ( V11 / V12 / V13 ) .... You want to extend the misery two times over
	There is no such thing as the last bug in a program There are no stubborn bugs, There are only stubborn Debuggers.
Suggestion Quote Answer

6/1/2014 8:20 PM
BhaPraJ Silver Member Joined: 1/28/2012 Last visit: 1/5/2021 Posts: 519 Rating: (82)	[quote user="IBN-Service"][quote user="Wago"][quote user="Thangabali"][quote user="Wago"]Hello, 2-Successor for Simatic Manager V5.5 Indeed a dream!! TIA, a successor of Step 7. Actually I used to of Step 7 so much (Specially Shortcuts) that sometime I got annoyed with TIA. Shortcut is available in TIA V15 But it changed completely from Step7 classic... yes. & sometimes delay in development due to habitual use of Step7 shortcuts in TIA.
	Regards, BhaPraJ
Suggestion Quote Answer

6/1/2014 8:30 PM
BhaPraJ Silver Member Joined: 1/28/2012 Last visit: 1/5/2021 Posts: 519 Rating: (82)	[quote user="huggy_d1"][quote user="Wago"]Hello, Now,TIA Portal V15 softwareavailable in Siemens agents and distributers. Advantages: 1-Successor for TIA V11,TIA V12 and TIA V13 2-Successor for Simatic Manager V5.5 3- Contains all HWs for all successor software. 4-Open projects programmed from V 5.5 5-Can do Migration into comfort panels. 6-All options in V5.5 contains in TIA V15 Sorry,this is a dream may be a true. Best regards........ You are very optimistic. I think if you are lucky it would be V20, but even then, #3 and #6 would be missing (sadly, probably on purpose). I think the fact that legacy products are not supported tells you that Siemens decided to create new CPU/PLC hardware and firmware configurations that are never future-proof - unlike many competitors... V20. ? I got confused with Sinamics V20 for a moment. .
	Regards, BhaPraJ
Suggestion Quote Answer

6/1/2014 8:43 PM
VVago Posts: 784 Rating: (50)	Pranav J. Bhagat V20. ? I got confused with Sinamics V20 for a moment. . I said V15not V20
VVago Posts: 784 Rating: (50)
Suggestion Quote Answer

6/1/2014 8:55 PM
Blue Moderator Moderator Joined: 4/21/2006 Last visit: 10/30/2020 Posts: 517 Rating: (23)	I deleted all improper postings. Blue Moderator

Suggestion Quote Answer

6/1/2014 9:04 PM
SMHZ Bronze Member Joined: 10/19/2012 Last visit: 12/23/2020 Posts: 314 Rating: (9)	Thangabali Wago Hello, 2-Successor for Simatic Manager V5.5 Indeed a dream!! TIA, a successor of Step 7. Actually I used to of Step 7 so much (Specially Shortcuts) that sometime I got annoyed with TIA. Thats because Humans are afraid of change:p

Suggestion Quote Answer

6/1/2014 9:10 PM
Navnag Platinum Member Joined: 11/21/2007 Last visit: 1/11/2021 Posts: 2320 Rating: (298)	Blue Moderator I deleted all improper postings. Blue Moderator Blue Moderatorspending sleepless nights ... is that due to campaign or is this normal
	There is no such thing as the last bug in a program There are no stubborn bugs, There are only stubborn Debuggers.
Suggestion Quote Answer

12/17/2017 12:25 PM	Rate (0)
Simaticov Bronze Member Joined: 11/16/2006 Last visit: 12/6/2020 Posts: 69 Rating: (11)	VVago Hello, 6/1/2014 4:07 PM Now,TIA Portal V15 softwareavailable in Siemens agents and distributers. Advantages: 1-Successor for TIA V11,TIA V12 and TIA V13 2-Successor for Simatic Manager V5.5 3- Contains all HWs for all successor software. 4-Open projects programmed from V 5.5 5-Can do Migration into comfort panels. 6-All options in V5.5 contains in TIA V15 Sorry,this is a dream may be come true. Best regards........ 3 years later TIA Portal V15 Launch https://www.youtube.com/watch?v=C5XkGlKtEK0 https://www.siemens.com/press/en/pressrelease/?press=/en/pressrelease/2017/digitalfactory/pr2017110054dfen.htm&content[]=DF unknown user Highlights of the expanded application possibilities in the TIA Portal V15 are the multifunctional platform for integrating high-level language applications and additional drive systems, including a safety acceptance test, the integration of handling functions and 2D to 4D kinematics into Simatic S7-1500 controllers, and the connection and programming of robots. The inclusion of the new multifunctional platform in the portfolio of Simatic S7-1500 Advanced Controllers now enables high-level language applications to be easily created and reused with C/C++ and commercial programming tools, such as Eclipse. The integration of the Sinamics S120 and other drive families now enables the complete Siemens drive technology to be configured, commissioned and diagnosed in the TIA Portal. Another new feature is a Wizard-guided safety acceptance test for the Sinamics G drive family. In conjunction with new technology CPUs for the Simatic S7-1500 Advanced Controller, handling functions with 2D to 4D kinematics can now be easily and efficiently programmed, simulated and commissioned in the TIA Portal....
	Last edited by: Simaticov at: 12/17/2017 12:27:33 PM Last edited by: Simaticov at: 12/17/2017 12:28:01 PM
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Jen_Moderator zzVss

1/25/2018 9:20 AM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 1/22/2021 Posts: 4416 Rating: (73)	New question published by AutoGen_4398424 is split to a separate thread with the subject TIA V15: Can open project created in V14 and modify/save/use it without need to upgrade the project in V15?. Best regards Jen_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on