Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Time Synchronization

Created by: moone at: 3/15/2013 7:46 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/15/2013 7:46 AM	Rate (0)
moone Member Joined: 1/14/2012 Last visit: 12/17/2018 Posts: 3 Rating: (0)	Hi, Does any one know the exact function of "MBUS Time Synchronization" under NIM32 tab of APACS+ control panel? Thanks

Suggestion To thank Quote Answer

3/15/2013 1:11 PM	Rate (0)
GirlGeek_44 Member Joined: 2/18/2013 Last visit: 3/15/2013 Posts: 3 Rating: (0)	Hi, moone, The MBUS Time Synchronization checkbox in the NIM32 is to allow the IEMs to function as the Time Synch Masterwhen using the newest IEM software. There are Configuration Settings in the IEM's Gateway.ini file which manage configuration and behavior. Section 5 of the current IEM User's Guide describes them in detail. Hope this is helpful! Best, GirlGeek_44

Suggestion To thank Quote Answer

3/22/2013 5:29 PM	Rate (0)
moone Member Joined: 1/14/2012 Last visit: 12/17/2018 Posts: 3 Rating: (0)	GirlGeek_44 Hi, moone, The MBUS Time Synchronization checkbox in the NIM32 is to allow the IEMs to function as the Time Synch Masterwhen using the newest IEM software. There are Configuration Settings in the IEM's Gateway.ini file which manage configuration and behavior. Section 5 of the current IEM User's Guide describes them in detail. Hope this is helpful! Best, GirlGeek_44 Hi GirlGeek, Thanks for your reply. In addition to my previous post, I have no IEM in my network. What I addressed was from a 4-Mation Engineering station connected to 2 resources through Mbus cable. Does it make any sense for my case? Can I synchronize 4-Mation station to resource(getting time from resource not sending time to resource)? Regards

Suggestion To thank Quote Answer

| |

Follow us on