Skip to Content

support.automation.siemens.com | Technical Forum | Saturday, February 27, 2021 11:53:53 PM

Print

two analogs input to two analog comperator

Created by: BerraB at: 3/3/2010 9:52 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/3/2010 9:52 AM	Rate (0)
BerraB Advanced Member Joined: 6/5/2009 Last visit: 1/29/2020 Posts: 35 Rating: (0)	Hi, Is it possible to use two analogs input to two analog comperator, in the first case the analog comperator has the gain = 0,1, and in the second case the analog comperator has the gain = 0.06, If a set M1 the analog comperator, i want the calculation of the gain 0.1 and if M2 i set, the analog comperator i want the calculation of the gain 0.06 / Berra

Suggestion To thank Quote Answer

3/4/2010 8:16 AM	Rate (0)
Andres [Str] Posts: 153 Rating: (15)	Hi,BerraB On an example. Open *Block Propeties* in *Analog Comparator. By means of arrows to choose the necessary value on both analogue comparators in Gain (Parameter)* Attachment two_analogs_ input_to_two_analog_comperator_str.JPG (96 Downloads)
Andres [Str] Posts: 153 Rating: (15)
Suggestion To thank Quote Answer

3/4/2010 8:23 AM	Rate (0)
BerraB Advanced Member Joined: 6/5/2009 Last visit: 1/29/2020 Posts: 35 Rating: (0)	Hi Andreay I have allredy try thatm but the problem is when i chose the analog compactor 2 and go back to analog compactor 1, the gain value of analog compator is still on... you can look at my file. / BerraB Attachment Kopia av Basprogram v 4.0.70.zip (72 Downloads)

Suggestion To thank Quote Answer