5/23/2007 1:17 PM | |
Posts: 3149 Rating: (171)
|
Hi I searched WinCC help for modbus and you are right with WinCC V6 the modbus-driver is only available at allemendinger. nemo |
6/13/2007 2:38 PM | |
Posts: 54 Rating: (2) |
I' ve imported the drivers for modbus forom WinCC v5 to v6 and it is working. |
10/11/2008 7:31 AM | |
Posts: 8 Rating: (0) |
hai Darius, i have the same problem for WINCC and MODBUS, Can u pls sent me the Modbus driver for running in WinCC6.2. Thanks & Regards, Balu |
1/19/2009 1:42 PM | |
Posts: 1776 Rating: (95)
|
Hi, as mentioned in this FAQ http://support.automation.siemens.com/WW/view/en/21915573 you can order the modbus channel at www.allmendinger.de |
6/25/2009 11:51 AM | |
Posts: 2 Rating: (0) |
Does this mean that the only Siemens supported solution to interface with Modbus Slave is touse S7-300 or S7-400 with loadable driver on CP 341 or CP 441-2? |
3/26/2011 8:14 PM | |
Joined: 5/24/2010 Last visit: 2/8/2022 Posts: 46 Rating: (5) |
Hello! Plese look this thread. |
1/23/2012 11:12 PM | |
Joined: 12/17/2011 Last visit: 4/9/2024 Posts: 1 Rating: (0) |
I am also looking for the modbus driver V5 to use in WinCC V6.2 Thank you for your help
|
1/31/2012 1:57 PM | |
Posts: 1776 Rating: (95)
|
Hi, please contact the distributor Allmendinger see link www.allmendinger.de and search for modbus |
10/7/2015 10:09 AM | |
Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4774 Rating: (123) |
New question published by engineerpardisan is split to a separate thread with the subject WinCC and Modbus RTU. Best regards |
Follow us on