5/30/2011 7:31 PM | |
Posts: 23 Rating: (0) |
AttachmentWinCC Problem.pdf (163 Downloads) |
Last edited by: phyoemaung at: 5/30/2011 7:32 PM |
|
5/30/2011 7:37 PM | |
Posts: 8946 Rating: (998) |
Uhhh.... Try first the "Reset" function in WinCCflexible Start Center. |
5/30/2011 7:41 PM | |
Posts: 23 Rating: (0) |
Hello, Thanks for your reply. Where should i go and reset Wincc? I reset my PC ald 2 times. Kindly suggest me winCC reset function. Bgrds, |
5/30/2011 7:57 PM | |
Joined: 3/21/2006 Last visit: 3/26/2024 Posts: 10228 Rating: (1180) |
Sorry, at the moment I don't have WinCC Flex. Meanwhile update to SP2 your WinCC Flex. see entry ID: 38612895 and then to Update for WinCC flexible 2008 Service Pack 2. I'll try to find a picture for WinCC Flex Center. Could be that in your cese it is disabled. Look at WinCC flexible Start Center |
Last edited by: UMENCHO at: 5/30/2011 8:03 PM |
|
5/30/2011 8:03 PM | |
Posts: 8946 Rating: (998) |
I dont like this idea very much... If ES will be updated to SP2, all existing Runtimes must also be updated by further changes. That may need some time..... So, before youdo an Update from SP1 to SP2, check if you will not have some other problems in future. Anyway, you should check that the latest HF is installed! |
5/30/2011 8:30 PM | |
Posts: 23 Rating: (0) |
Hi, Many Thanks UMENCHO, I am now downloading. Bgrds, |
5/30/2011 8:35 PM | |
Joined: 3/21/2006 Last visit: 3/26/2024 Posts: 10228 Rating: (1180) |
Thanks after solving the problem. And be careful with updates after as was mentioned by IBN-Service... best regards, Hristo Mihalev |
5/30/2011 8:39 PM | |
Posts: 8946 Rating: (998) |
Whatever, here is the link for Hotfx 5 to SP1. I never got the problem we are talking about with SP1. |
Last edited by: IBN-Service at: 5/30/2011 8:40 PM |
|
5/31/2011 5:39 AM | |
Posts: 23 Rating: (0) |
Hello All, I solved my problems after install SP 2 and Update 13. Many Thanks to you all indeed! Bgrds |
This contribution was helpful to2 thankful Users |
Follow us on