Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC+STEP7: Object Manager is absent

Created by: Victoria99 at: 5/27/2011 9:24 PM (16 Replies)

Rating (3)

Thanks 7

Result pages:: |; 1 | 2; |

17 Entries

Entries per page: 10 | all

10/25/2012 12:55 PM	Rate (0)
banconi Silver Member Joined: 3/19/2010 Last visit: 4/5/2021 Posts: 403 Rating: (10)	Dear all, I have the same problem, I don't see Object Manager in the installation list of my WinCC Setup. I installed the WinCC 7.0 SP3, and then Wincc V7 SP3 Update 1 over that, and afterwards I installed Step 7 V5.4 SP4. From other threads in this forum I figured out that AS/OS engineering is what I need, and Object Manager also. I have installed AS-OS, but there is no Object manager, neither on the setup for WCC 7, nor the WCC 7Update 1. I am sending screen shots of both my installation options (regular Wcc7 and Wcc7Update1) where you can see what I am talking about. Any solutions? Attachment InstallationScreens.zip (253 Downloads)

Suggestion To thank Quote Answer

1/5/2013 1:42 AM	Rate (0)
johnny8787 Posts: 16 Rating: (1)	I have the same problem. I can't see listed object manager in wincc 7.0 sp3 installtion program , I'm using expert installation mode. Step 7 5.5 was installed first. Soi get the error: "The project contains objects of the software package 'WinCC(Component Object Manager) .... " Regards.
johnny8787 Posts: 16 Rating: (1)
Suggestion To thank Quote Answer

1/7/2013 4:10 PM	Rate (1)
johnny8787 Posts: 16 Rating: (1)	johnny8787 I have the same problem. I can't see listed object manager in wincc 7.0 sp3 installtion program , I'm using expert installation mode. Step 7 5.5 was installed first. Soi get the error: "The project contains objects of the software package 'WinCC(Component Object Manager) .... " Regards. Ok. I fixed it uninstalling wincc and step7, and reinstalling in this order: Step 7 V5.5, wincc V7 SP3, wincc update 1, wincc update 2.
johnny8787 Posts: 16 Rating: (1)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users dchartier

1/7/2013 11:17 PM	Rate (0)
banconi Silver Member Joined: 3/19/2010 Last visit: 4/5/2021 Posts: 403 Rating: (10)	If moderators had only said that earlier, I would have done the same. Instead, they said that it is possible to fix the problem even if you have missed the procedure, that is, the instalation sequence. This is helpful also, thanks.

Suggestion To thank Quote Answer

2/19/2015 1:34 PM	Rate (2)
Milov Bronze Member Joined: 6/13/2011 Last visit: 7/22/2020 Posts: 65 Rating: (3)	I had the same problem - missing Object Manager, but in WinCC 7.3. I explored the WinCC instalation disc to E:\InstData\WinCC-Runtime\setup and I started WinCCRuntime.msi. In the "Custom Setup" page I saw that Object Manager is marked with red X. So I marked it to be installed and I continued with instalation

Suggestion To thank Quote Answer
This contribution was helpful to 4 thankful Users AutoGen_992839 rodrigog thetruthishere pimpim32

5/21/2015 3:44 AM	Rate (0)
AutoGen_992839 Posts: 1 Rating: (0)	Yes, it works! I delete WinCC RT, and then install it again (User-defined installation). WinCC RT contains Object Manager. Then install Update 9 for WinCC (i need this update), and all OK.
AutoGen_992839 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users rodrigog

10/16/2020 1:49 PM	Rate (0)
pimpim32 Advanced Member Joined: 3/6/2008 Last visit: 1/14/2021 Posts: 48 Rating: (0)	After these years, still your answer was a lifesaver. Thanks a lot.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

WinCC Installation Options General

Follow us on