Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Winder V3.1.2: change of the control mode on the fly

Created by: valyy at: 2/17/2017 9:43 AM (6 Replies)

Rating (1)

Thanks 1

7 Entries

2/17/2017 9:43 AM	Rate (0)
valyy Experienced Member Joined: 5/16/2011 Last visit: 3/21/2021 Posts: 52 Rating: (0)	Goodmorning everyone. As Mentioned in the manual, with the new library a change of the control mode can be done on the fly During the winding process. It would be of Key Importance to use this new procedure. I wanted to ask the experts what should I do for this mode change on the fly? Thanks! V.Vavassori

Suggestion To thank Quote Answer

2/17/2017 1:44 PM	Rate (1)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 4/13/2021 Posts: 4738 Rating: (597)	Hello V.Vavassori, you could change the mode direct at the FBWinder input parameter controlMode. At the same time you have to change the technology controller settings (gain factor, integration time, ...) to the settings of the new control mode. The transition behavior could be influenced by the ramp function generators of the technology controller and the torque limitations. If you have further questions you could find the relevant contact information on the last page of each documentation.
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users valyy

2/17/2017 1:47 PM	Rate (0)
Jeff Casagrande Posts: 1529 Rating: (195)	I'm wondering why? This is potentially dangerous. Winders are pretty well defined as they are for operating modes.
Jeff Casagrande Posts: 1529 Rating: (195)
Suggestion To thank Quote Answer

2/20/2017 11:14 AM	Rate (0)
valyy Experienced Member Joined: 5/16/2011 Last visit: 3/21/2021 Posts: 52 Rating: (0)	Hello TechTeam , Thank you for the reply. To Jeff It is true, now the winder process is consolidated and reliable, but like all things the times change and new needs arise. Best regards V.Vavassori

Suggestion To thank Quote Answer

2/20/2017 12:12 PM	Rate (0)
Jeff Casagrande Posts: 1529 Rating: (195)	valyy It is true, now the winder process is consolidated and reliable, but like all things the times change and new needs arise. Best regards V.Vavassori Which is usually translated as "I don't understand how this works". Please do not re-invent the wheel. The wheel works just fine the way it is.
Jeff Casagrande Posts: 1529 Rating: (195)
Suggestion To thank Quote Answer

2/21/2017 10:29 AM	Rate (0)
metwally mustafa Silver Member Joined: 10/10/2010 Last visit: 2/10/2021 Posts: 296 Rating: (14)	we needto know how the problem solved Jeff Casagrande valyy It is true, now the winder process is consolidated and reliable, but like all things the times change and new needs arise. Best regards V.Vavassori Which is usually translated as "I don't understand how this works". Please do not re-invent the wheel. The wheel works just fine the way it is.

Suggestion To thank Quote Answer

2/23/2017 3:46 PM	Rate (0)
valyy Experienced Member Joined: 5/16/2011 Last visit: 3/21/2021 Posts: 52 Rating: (0)	The Solution Has Been explained above by TechTeam. Best Regards V.Vavassori

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on