Skip to Content

support.automation.siemens.com | Technical Forum | Tuesday, January 19, 2021 1:25:56 AM

Print

WinnCC Flexible coomunication with GE versamax micro PLC

Created by: lufego at: 5/28/2011 2:00 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/28/2011 2:00 PM	Rate (0)
lufego Advanced Member Joined: 6/20/2008 Last visit: 12/7/2020 Posts: 14 Rating: (0)	Hi, i need to communicate a WinCC Flexible Runtime with a Versamax Micro 64 PLC + ethernet module. This module support protocols SRTP and Modbus TCP (server). How can I configure my WinCC Flexible Runtime in order to be able to communicate.

Suggestion To thank Quote Answer

5/28/2011 3:06 PM	Rate (0)
Niranjan Prasad Silver Member Joined: 4/15/2009 Last visit: 4/25/2016 Posts: 691 Rating: (35)	I don't think you can communicate your GE Fanuc PLCs through SIMATIC HMIs. Earlier WinCC Flexible was having the communication drivers for GE Fanuc but now it has reduced to only four. If you want to communicate your GE Fanuc PLCs, then you have to do it through S7 PLC and then show it to SIMATIC HMI
	Niranjan
Suggestion To thank Quote Answer

5/28/2011 3:24 PM	Rate (0)
MavEric Bronze Member Joined: 5/28/2009 Last visit: 1/12/2021 Posts: 125 Rating: (9)	lufego Hi, i need to communicate a WinCC Flexible Runtime with a Versamax Micro 64 PLC + ethernet module. This module support protocols SRTP and Modbus TCP (server). How can I configure my WinCC Flexible Runtime in order to be able to communicate. Hi.lufego See the Attachment. Another Option is OPC. Attachment WinccFlex.JPG (209 Downloads)
	Regards, SKD
Suggestion To thank Quote Answer