Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

write a text in runtime

Created by: automation_1 at: 5/24/2012 9:33 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/24/2012 9:33 PM	Rate (0)
automation_1 Experienced Member Joined: 3/17/2008 Last visit: 9/4/2014 Posts: 133 Rating: (2)	I posted this on Step7 but may be here is the right place: S7-300 and HMI (winccflexible) ,it is a sort of store, with 36 different position (matrix 3x2x6) where i have to put objects ( each other different );i was thinking that operator when has to store a new object has to associate a text (made on runtime) that describe it and that "follow" its position into the store, so when operator wants that object, the system knows where it is. I'm looking for some advises to do something like that, (on HMI/pc)

Suggestion To thank

5/25/2012 7:45 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 7/23/2019 Posts: 2702 Rating: (134)	Thread closed because question is already published. If you want to discuss about this question, please use the following thread. associate a text to a position Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

| |

Follow us on