Navigation

WinCC Appl can't be found in Hardware Catalogue of SIMATIC Manager

Created by: Bizur at: 12/15/2014 11:33 AM (1 Replies)

12/15/2014 11:33 AM	Rate (0)
Bizur Posts: 1530 Rating: (59)	Hello, I installed WinCC V7.3 Upd1and STEP 7 V5.5 SP1. I also installed AS-OS-Engineering. If I add a PC-Station I can't choose WinCC Appl in Hardware catalogue, because it doesn't exist. Only parent folder "HMI" exists. I tried already to actualize HW-Updates. But it didn't work. I know already that there is a fault existing which causes, that you can't choose WinCC Application in Koko. That's not my problem. But nevertheless I already fixed necessary changes to have this fault not longer. Has somebody any ideas what could be the reason for this? Best regards Bizur
Bizur Posts: 1530 Rating: (59)
Suggestion To thank Quote Answer

12/15/2014 12:20 PM	Rate (0)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 1/2/2026 Posts: 6891 Rating: (1368)	Bizur Hello, I installed WinCC V7.3 Upd1and STEP 7 V5.5 SP1. I also installed AS-OS-Engineering. If I add a PC-Station I can't choose WinCC Appl in Hardware catalogue, because it doesn't exist. Only parent folder "HMI" exists. I tried already to actualize HW-Updates. But it didn't work. I know already that there is a fault existing which causes, that you can't choose WinCC Application in Koko. That's not my problem. But nevertheless I already fixed necessary changes to have this fault not longer. Has somebody any ideas what could be the reason for this? Best regards Bizur Hello Bizur, I guess you miss a SIMATIC NET component to add all you need in your station configurator: SIMATIC NET Industrial Communication Commissioning PC Stations - Manual and Quick Start Configuration Manual I hope this helps, Hamid Hosseini
	Demo Channel on Youtube
Suggestion To thank Quote Answer