Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Simatic Information Server

Created by: Ashok Naphade at: 10/6/2015 10:27 AM (7 Replies)

Rating (1)

Thanks 2

8 Entries

10/6/2015 10:27 AM	Rate (0)
Ashok Naphade Bronze Member Joined: 6/8/2013 Last visit: 6/24/2025 Posts: 159 Rating: (9)	Hi, I am using wincc v7.3 update 2 & information server 2014 on same pc of windows-7 prof. 64 bit. i want to create customized report as per customer requirement. i allready downloaded documents from forum but not so useful. So you have any documents to do customized report . Thanks.......

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users RussianFox

10/6/2015 10:37 AM	Rate (1)
bg2492 Diamond Member Joined: 5/16/2014 Last visit: 9/12/2022 Posts: 7298 Rating: (2188)	Hello Ashok Naphade, you can download the "Information Server 2014:Operating Instructions" as PDF. https://support.industry.siemens.com/cs/de/en/view/68099543 Regards Georg Berghof
	PS: If this post did really help you, you may use the Rate-button
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ashok Naphade

10/6/2015 11:16 AM	Rate (0)
Ashok Naphade Bronze Member Joined: 6/8/2013 Last visit: 6/24/2025 Posts: 159 Rating: (9)	Thank you very much. actually download link is not working. but show & configure is ok Thanks ...

Suggestion To thank Quote Answer

10/6/2015 4:26 PM	Rate (0)
Ashok Naphade Bronze Member Joined: 6/8/2013 Last visit: 6/24/2025 Posts: 159 Rating: (9)	hi, when i am going to connect my project to infromation server through internet explore - configuration, it shos the error server not pinging. but wincc project on same pc & it is pinging. Please help me Thanks.

Suggestion To thank Quote Answer

10/7/2015 7:55 AM	Rate (0)
bg2492 Diamond Member Joined: 5/16/2014 Last visit: 9/12/2022 Posts: 7298 Rating: (2188)	Hello Ashok Naphade, if you can not reach the Server on an other PC, I think you have a problem with user rights or settings of firewall in Windows. Regards Georg Berghof
	PS: If this post did really help you, you may use the Rate-button
Suggestion To thank Quote Answer

10/7/2015 8:49 AM	Rate (0)
Amol V Experienced Member Joined: 9/21/2013 Last visit: 6/17/2024 Posts: 66 Rating: (1)	Dear Sir, I was also having problem when i try to add project in simatic information server my project is getting accessed but when i select project & click on add button it is showing error please check in attachment. Thanks in advance Attachment New Microsoft Word Document.docx (305 Downloads)

Suggestion To thank Quote Answer

10/13/2015 6:37 PM	Rate (0)
moe-engineer Posts: 24 Rating: (3)	dear friend, i am facing the same problem cannnot add project please tell what is the solution i need ur help ASAP !!!!
moe-engineer Posts: 24 Rating: (3)
Suggestion To thank Quote Answer

1/27/2016 3:53 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4760 Rating: (122)	New question published by RussianFox is split to a separate thread with the subject Simatic Information Server questions. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

WinCC Installation Options General

Follow us on