Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Ethernet in logo 8

Created by: fahad992 at: 12/30/2015 9:49 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

12/30/2015 9:49 PM	Rate (0)
fahad992 Posts: 19 Rating: (0)	Hi everyone I have logo 8 ,and i have wireless detection sensors connected to an access point,,and i want to conect the acsess point to the logo via ethernet as input to read the sensors and make action depending on the wireless sensors status... can the logo handle this situation ?...if yes how to configure the ip and network staff?...if no ,what is the alternative solution to solve this task ... Thnx 😃
fahad992 Posts: 19 Rating: (0)
Suggestion To thank Quote Answer

12/30/2015 10:02 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 1/11/2026 Posts: 36435 Rating: (4547)	No, that can not the logo. The logo can only communicate with remote stations, which communicate with the S7-200 protocol.

Suggestion To thank Quote Answer

12/30/2015 10:15 PM	Rate (0)
fahad992 Posts: 19 Rating: (0)	Thank you mr.ixo65 for your reply... So iwhat is the alternative solution to solve this task ?
fahad992 Posts: 19 Rating: (0)	Last edited by: fahad992 at: 12/30/2015 10:15:45 PM
Suggestion To thank Quote Answer

12/30/2015 10:22 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 1/11/2026 Posts: 36435 Rating: (4547)	I do not know, but not with the logo. Just because the logo (0BA7 and 0BA8) have an Ethernet port, can not evaluate any traffic.

Suggestion To thank Quote Answer

1/1/2016 7:08 AM	Rate (0)
William_B Posts: 5225 Rating: (1204)	fahad992 Thank you mr.ixo65 for your reply... So iwhat is the alternative solution to solve this task ? Possibly you can use an S7-1200 for the job.... but more information is required to answer the question. Suggestion: Make a new theme under "Communications / Networks". Explain in detail what you have and what you want to achieve. Especially focus on what protocol is used in communication. Ask there what PLC is suggested by the experts. w
William_B Posts: 5225 Rating: (1204)
Suggestion To thank Quote Answer

1/4/2016 11:14 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 1/9/2026 Posts: 4114 Rating: (195)	New question published by Le Test !! is split to a separate thread with the subject Program a logo8 from a distance . Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on