Station Configuration Editor with S7 1500 as well as S7 400H

Hi All,

We have a plant architecture with few numbers of S7 1500 PLC's which is in communication with WinCC through OPC connection where connection setting are done at the Simatic PC station at the TIA portal and downloaded the station configuration editor of Server PC.

Now we have a new requirement to add a S7 400H system in the same network and to the same server. Which means the fault tolerant connection is created at the Simatic Manager between  S7 400H System and PC Station(Server PC).

So we have to download the s7 400 H fault tolerant connection to the Server PC's  "station configuration editor", which will overwrite the S7 1500 configuration.

Please guide me to configure the  S71500 as well as S7400 H in single station configuration a Server PC.  

New question published by Afi1 is split to a separate thread with the subject Can anyone refer me to Siemens software downloads to fix or reinistate these applications?.

Best regards
Jen_Moderator