Default Header
(header konnte nicht geladen werden)
Navigation
Rating 
Thanks 1
7 Entries
| 5/8/2017 9:41 AM | |
Joined: 4/24/2006 Last visit: 1/7/2026 Posts: 9101 Rating:
|
Hello, You can use a HMI with Ethernet interface. Have a look at the following link: How do you establish a connection between a LOGO! 0BA7 and an HMI Panel? You need an Ethernet cable (patch cable) to connect to LOGO! 8 Best regards, Wizard |
This contribution was helpful to
|
|
| 5/8/2017 9:50 AM | |
|
Posts: 17 Rating:
|
Hello, Can you recommend me a regular product (patch cable - Ethernet cable) provided Siemens for interface connection LOGO! 8. Thanks. |
| 5/12/2017 8:14 AM | |
|
Posts: 2930 Rating:
|
Hi, check www.siemens.com/logo and what kind of starterkits are offered. You can also find starterkits including HMI, SW and LOGO! in one kit. Hope this helps |
| 6/30/2017 2:24 PM | |
|
Posts: 8171 Rating:
|
New question published by 123+asd is split to a separate thread with the subject Network output from the Logo to create an event which illuminates a circle on the KTP screen . Best regards |
Follow us on