Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

TDE won't communicate with Logo

Created by: ashscott at: 10/30/2017 4:53 PM (8 Replies)

Rating (1)

Thanks 3

9 Entries

10/30/2017 4:53 PM	Rate (0)
ashscott Posts: 7 Rating: (0)	I've just got my first Logo and can't get the TDE to talk to it. I've attached two screen shots that may help. I have tried alternate cables and all Logo selections, as per the picture, to no avail. Any advice will be much appreciated. Attachment IMG_1250.JPG (334 Downloads)
ashscott Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

10/30/2017 4:55 PM	Rate (0)
ashscott Posts: 7 Rating: (0)	Attachment IMG_1249.JPG (325 Downloads)
ashscott Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

10/30/2017 5:13 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 12/26/2025 Posts: 36377 Rating: (4544)	What is the IP address of the LOGO! ? Are LOGO! and TDE connected direktly or with a router?

Suggestion To thank Quote Answer

10/30/2017 8:47 PM	Rate (0)
ashscott Posts: 7 Rating: (0)	Thank you for replying. They are directly connected by cable. I can't determine the IP address of the Logo other than it should be one of the three IP addresses shown in the screenshot. I have tried selecting each one without success. I suspect that this is where the problem lies.
ashscott Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

10/30/2017 9:11 PM	Rate (1)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 12/26/2025 Posts: 36377 Rating: (4544)	Do you have a LOGO! without display? The default addresses of LOGO! and TDE are with firmware FS04: LOGO! = 192.168.000.003 TDE = 192.168.000.002 The subnet mask for both are 255.255.255.000. If Siemens has not changed that with the new devices, it should work. If the devices are directly connected, you do not need to specify a gateway address.

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users RKBIS ashscott

10/31/2017 4:17 PM	Rate (0)
ashscott Posts: 7 Rating: (0)	Thank you.That helped a lot. Now sorted.
ashscott Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

10/31/2017 4:40 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 12/26/2025 Posts: 36377 Rating: (4544)	Hello ashscott, you're welcome... Is your problem now solved?

Suggestion To thank Quote Answer

10/31/2017 5:21 PM	Rate (0)
ashscott Posts: 7 Rating: (0)	Yes thank you.
ashscott Posts: 7 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ixo65

5/22/2018 7:18 AM	Rate (0)
Jen_Moderator Posts: 8171 Rating: (174)	New question published by Mohamed Asharaf is split to a separate thread with the subject Not able to communicate with LOGO v8 with LOGO TDE. Best regards Jen_Moderator
Jen_Moderator Posts: 8171 Rating: (174)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on