Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

3SU1803-0AB10-4HB1 GSD file?

Created by: AutoGen_3202899 at: 1/17/2018 1:56 AM (6 Replies)

Rating (0)

Thanks 0

7 Entries

1/17/2018 1:56 AM	Rate (0)
AutoGen_3202899 Posts: 5 Rating: (0)	Hi! I can't find the 3SU1803-0AB10-4HB1 AS-Interface enclosure on the TIA-Portal V15. Is there a GSD file for that? Thanks for the help!
AutoGen_3202899 Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

1/17/2018 7:08 AM	Rate (0)
PISCEAN 2010 Posts: 8092 Rating: (884)	Hello AutoGen_3202899 You need to install CP so as to install & configure ASi interface. HTH
PISCEAN 2010 Posts: 8092 Rating: (884)
Suggestion To thank Quote Answer

4/27/2018 3:05 AM	Rate (0)
AutoGen_3202899 Posts: 5 Rating: (0)	Hey, thanks for your reply but sorry, I don't quite understand... What does CP mean in that context? Where can I install it from? I am using the ET200 AS-i Master to connect the AS-i devices... And it was working fine for a lot of other AS-i devices (lighttower, DIDQ, door lock).. Why is that different with the AS-i enclosures?
AutoGen_3202899 Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

4/27/2018 11:23 AM	Rate (0)
Murof Platinum Member Joined: 8/3/2009 Last visit: 12/19/2025 Posts: 16612 Rating: (1943)	Hello which PLC do you use exacly?? perhaps the basic way of doing helps: https://www.youtube.com/watch?v=EQjGG_FybK4 Bye Murof
	Last edited by: Jen_Moderator at: 4/27/2018 12:36:04 PM Inserted video. If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

4/27/2018 6:21 PM	Rate (0)
Annemarie Breu Posts: 19 Rating: (0)	Hi, thanks for your quick reply. So as far as I understand from the video, I would need to download an additional AS-i library, right? Can you tell me where I can find that? I was searching for it but only found a very old version: https://mall.industry.siemens.com/mall/en/tr/Catalog/Products/10046725 I am using a 1515TF PLC and an ET200 Interface Module 155-6 PN ST + CM AS-i Master and F-CM AS-i Safety
Annemarie Breu Posts: 19 Rating: (0)
Suggestion To thank Quote Answer

5/1/2018 5:15 PM	Rate (0)
Annemarie Breu Posts: 19 Rating: (0)	Hi, any help for that would be greatly appreciated :)
Annemarie Breu Posts: 19 Rating: (0)
Suggestion To thank Quote Answer

5/9/2018 1:17 AM	Rate (0)
Annemarie Breu Posts: 19 Rating: (0)	Hi, where can I download the latest As-Interface library for adding As-I E-Stops and enclosures to a TIA Portal project? Thanks in advance!
Annemarie Breu Posts: 19 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on