Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Does PLCSIM support only S7-CONNECTION blocks and does not support OPEN COMMUNICATION BLOCKS?

Created by: moelsayed at: 5/5/2018 9:25 PM (4 Replies)

Rating (0)

Thanks 2

5 Entries

5/5/2018 9:25 PM	Rate (0)
moelsayed Experienced Member Joined: 7/21/2015 Last visit: 9/27/2022 Posts: 100 Rating: (2)	Dear all, is it correct that PLCSIM support only S7-CONNECTION blocks and does not support OPEN COMMUNICATION BLOCKS . please any ideas about my issue. Thanks ------------------------------------------------------------------------------------------ Split from T-communication blocks and PLCSIM.
	Last edited by: moelsayed at: 5/6/2018 7:55:25 AM Last edited by: moelsayed at: 5/6/2018 7:56:00 AM Last edited by: Jen_Moderator at: 5/7/2018 7:09:22 AM New subject after splitting
Suggestion To thank Quote Answer

5/7/2018 7:59 AM	Rate (0)
Duris_I Diamond Member Joined: 4/28/2015 Last visit: 4/19/2025 Posts: 10876 Rating: (837)	Hello, I recommend check your PLCSIM version manual/documentation. I expect generally informations about supported/not supported services there.
	With best regards... Ivan Duris Flight: OMICO
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Murof

5/7/2018 11:01 AM	Rate (0)
Towome Platinum Expert Joined: 7/9/2015 Last visit: 8/29/2025 Posts: 4443 Rating: (641)	Hi, the information you want to know depends on the CPU used. Please check Online Helpf of PLCSIM. There you will chapter "Suported communication instructions between PLC families" - check Screenshot. Regards, Towome Attachment plcsim.JPG (305 Downloads)
	If my post was useful, please rate me - if not, please tell me - thank you!
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Murof

5/7/2018 1:07 PM	Rate (0)
mopS04 Platinum Expert Joined: 3/5/2014 Last visit: 8/5/2022 Posts: 5521 Rating: (1058)	hi moelsayed, have a look in the TIA-help of PLCSim. There you find the supported instructions for your PLCSim version. regards,
	FCK WAR! Be nice!
Suggestion To thank Quote Answer

5/8/2018 2:17 AM	Rate (0)
moelsayed Experienced Member Joined: 7/21/2015 Last visit: 9/27/2022 Posts: 100 Rating: (2)	Dear all, Thanks for your reply. so I have to use TIA-PORTAL with cpu 1200 or 1500. Thanks, moelsayed

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on