Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

STEP 7 (TIA Portal) unable upload error (0604:000396)

Created by: Chetyo at: 6/22/2018 11:42 PM (4 Replies)

Rating (1)

Thanks 1

5 Entries

6/22/2018 11:42 PM	Rate (0)
Chetyo Posts: 1 Rating: (0)	Dear sir, could you help me for troubleshoot for the S7-1200 unable upload that it's showing CPU is incompatible CPU V13.0.0 with project V13.0.1 that I already update SP1 and download "e "compatibility_mode_V13_V13SP1" note : sorry am not good in English Attachment S7-1200 incompatible.jpg (473 Downloads)
Chetyo Posts: 1 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users grrrrrroooo

6/25/2018 3:12 PM	Rate (1)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 9/9/2025 Posts: 16079 Rating: (2514)	https://support.industry.siemens.com/cs/document/82169157 It describes how. Chetyo Dear sir, could you help me for troubleshoot for the S7-1200 unable upload that it's showing CPU is incompatible CPU V13.0.0 with project V13.0.1 that I already update SP1 and download "e "compatibility_mode_V13_V13SP1" note : sorry am not good in English
	science guy
Suggestion To thank Quote Answer

2/8/2019 1:50 PM	Rate (0)
Ziemens Silver Member Joined: 3/2/2007 Last visit: 9/9/2025 Posts: 990 Rating: (5)	Chetyo could you help me for troubleshoot for the S7-1200 unable upload that it's showing CPU is incompatible CPU V13.0.0 with project V13.0.1 that I already update SP1 and download "e "compatibility_mode_V13_V13SP1" Kindly, did you solve this problem? is it ok?
	Last edited by: Ziemens at: 2/8/2019 1:50:35 PM ... thank you ...
Suggestion To thank Quote Answer

2/8/2019 1:55 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 9/2/2025 Posts: 22709 Rating: (3071)	the solution is in the link described. open the project in tia and don't update it. then upload the data from plc. Regards Christoph

Suggestion To thank Quote Answer

2/22/2019 11:04 AM	Rate (0)
Ziemens Silver Member Joined: 3/2/2007 Last visit: 9/9/2025 Posts: 990 Rating: (5)	it worked. but after i do the upload, and do save (in Tia v13 sp2), will it be ok? if i download again, will the plc run green?
	... thank you ...
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on