Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

SF FAULT -CPU 314

Created by: Uzair Ali siddiqui at: 9/27/2018 1:09 PM (9 Replies)

Rating (3)

Thanks 1

10 Entries

9/27/2018 1:09 PM	Rate (0)
Uzair Ali siddiqui Advanced Member Joined: 5/25/2015 Last visit: 6/1/2024 Posts: 30 Rating: (0)	Please help me wih this issue Attachment 2018-09-27 16_02_34-Greenshot.jpg (464 Downloads)

Suggestion To thank Quote Answer

9/27/2018 1:14 PM	Rate (1)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 12/24/2025 Posts: 9094 Rating: (1202)	Hello, Please have a look at Diagnostic Buffer. (There might be more information about the error) Best regards, Wizard

Suggestion To thank Quote Answer

9/27/2018 1:36 PM	Rate (1)
mopS04 Posts: 5521 Rating: (1058)	hi Uzair Ali, I also recommend you to have a look in the diagnostic buffer. You can also look online in the HW-Config if any other projected device that is linked to the CPU has a problem. hope this helps, regards,
mopS04 Posts: 5521 Rating: (1058)
Suggestion To thank Quote Answer

9/27/2018 4:09 PM	Rate (0)
snoop13014 Posts: 199 Rating: (25)	HI, As Wizzard and MOP => give us the Diagnostic Buffer content. Regards
snoop13014 Posts: 199 Rating: (25)
Suggestion To thank Quote Answer

9/27/2018 6:58 PM	Rate (0)
Uzair Ali siddiqui Advanced Member Joined: 5/25/2015 Last visit: 6/1/2024 Posts: 30 Rating: (0)	Please review the diagnostic buffer file.The program is running fine on the machine but there is a SF fault. Attachment Module Information-Diagnostic Buffer.pdf (502 Downloads)

Suggestion To thank Quote Answer

9/27/2018 8:03 PM	Rate (0)
Hati Platinum Member Joined: 9/21/2012 Last visit: 12/24/2025 Posts: 4827 Rating: (512)	There is a programming error in FC66. So you need to take a look on that block.

Suggestion To thank Quote Answer

9/28/2018 5:03 AM	Rate (0)
Uzair Ali siddiqui Advanced Member Joined: 5/25/2015 Last visit: 6/1/2024 Posts: 30 Rating: (0)	Hati There is a programming error in FC66. So you need to take a look on that block. Dear Hati, The FC66 block has been already deleted from the Program,And program is running fine on the machine.

Suggestion To thank Quote Answer

9/28/2018 7:24 AM	Rate (0)
Hati Platinum Member Joined: 9/21/2012 Last visit: 12/24/2025 Posts: 4827 Rating: (512)	Uzair Ali siddiqui Hati There is a programming error in FC66. So you need to take a look on that block. Dear Hati, The FC66 block has been already deleted from the Program,And program is running fine on the machine. And you still get the error in the diagnostics buffer? Did you also delete it from online, and not only the offline project? Are all the call of FC66 removed from the program also?

Suggestion To thank Quote Answer

9/28/2018 12:03 PM	Rate (1)
mopS04 Posts: 5521 Rating: (1058)	Uzair Ali siddiqui Hati There is a programming error in FC66. So you need to take a look on that block. Dear Hati, The FC66 block has been already deleted from the Program,And program is running fine on the machine. hi, exactly this is the error. FC66 is not loaded but it´s called by an other block. You can also see it in the Diagnostic buffer: Event 1 of 10: Event ID 16# 253C FC not loaded FC number: 66 Requested OB: Programming error OB (OB121) hope this helps, regards,
mopS04 Posts: 5521 Rating: (1058)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Med_selmi

9/24/2019 1:47 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 10/31/2025 Posts: 4114 Rating: (195)	New question published by Aditya.k is split to a separate thread with the subject SF FAULT -CPU 314 FC NOT LOADED" with event ID 16#253C. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on