LOGO! - Resolution analog input

I have a small automation system based on

LOGO! 24CE V8  6ED1052-1CC01-0BA8

LOGO! AM2 (2AI)  6ED1055-1MA00-0BA2

to analog input module LOGO! AM2 (2AI)  are connected pressure sensors (4..20mA),

Unfortunately LOGO! AM2 (2AI)  6ED1055-1MA00-0BA2 has a resolution of only 10 bit, normalized to 0 to 1000,

this is very small for our task, need to measure more accurately,

Can we somehow increase the resolution (hardware or software)?

What can you advise?

we can not replace LOGO to another system (eg. S7-1200).

ixo65

No, that's not possible. LOGO! can only resolution of 10 bit.

#dP

If it was a LOGO model that can handle ModbusTCP, then the option is to have a device that can put analog readings onto the communication line. It will not update quickly though.

 Could you advise such a Analog module (TCP/IP)?

_oleksandr_

 Could you advise such a Analog module (TCP/IP)?

No, there is no such device that I use. I am aware of their existence from CNC hobiests. You are on your own on sourcing something. (sorry)

Do you know if your model LOGO can handle ModbusTCP?

In your shoes I would use an S7-1200 PLC and make a communication link between the LOGO and S7-1200.

#dP

Do you know if your model LOGO can handle ModbusTCP?

 Yes, our version LOGO supports Modbus TCP/IP...