Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

STL CODE INTERPRETATION HELP

Created by: XHELL at: 6/13/2019 5:19 PM (4 Replies)

Rating (0)

Thanks 4

5 Entries

6/13/2019 5:19 PM	Rate (0)
XHELL Posts: 5 Rating: (0)	I would like someone to help with STL codes interpretation attached Thanks in advance Attachment Code interpretation.pdf (322 Downloads)
XHELL Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

6/14/2019 7:18 AM	Rate (0)
Prof. Frink Platinum Member Joined: 7/5/2013 Last visit: 1/12/2026 Posts: 3274 Rating: (526)	Hello XHELL, with three times NOP 0 it might be possible to change language from STL to e.g. LAD. If it is possible it might help to understand. Besides have a look at the network-comments. Regards, Frink
	Pi is exactly three! All you have to do is think of things which people need but which don’t exist yet.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users XHELL

6/14/2019 10:44 AM	Rate (0)
Lord_Farquaad Posts: 2 Rating: (0)	Might look like you are viewing STL code, but that looks like the STL interpretation/view of SCL source code.
Lord_Farquaad Posts: 2 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users XHELL

6/14/2019 2:13 PM	Rate (0)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 1/5/2026 Posts: 6892 Rating: (1368)	Hello, To add some points: when type check is active in LAD and mismatch in data type and instruction happens, only the STL version of a program is shown. Your program is in LAD and each section a programming box can be converted to LAD.Like comparator, move, timer, flank and set. I hope it helps, hdhosseini Attachment type_check.png (195 Downloads)
	Demo Channel on Youtube
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users XHELL

6/14/2019 5:19 PM	Rate (0)
XHELL Posts: 5 Rating: (0)	Wow awesome, thanks for the help
XHELL Posts: 5 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users hdhosseini

|

Share this page:

Share this page on...

Follow us on