Navigation

LOGO 8 - Is it possible for a logo expansion module to use 12v inputs if the base unit is using 24v?

Created by: c3ham at: 7/9/2019 1:46 PM (1 Replies)

7/9/2019 1:46 PM	Rate (0)
c3ham Posts: 8 Rating: (0)	Hi Is it possible for a logo expansion module to use 12v inputs if the base unit is using 24v? [snip] Thanks in advance Craig ------------------------------------------------------------------------------------------ Split from LOGO 8 12/24.
c3ham Posts: 8 Rating: (0)	Last edited by: c3ham at: 07/09/2019 13:48:43 Last edited by: c3ham at: 07/09/2019 13:48:59 Last edited by: Jen_Moderator at: 07/09/2019 14:29:54 New subject after splitting. Division of questions into seperate topics.
Suggestion To thank Quote Answer

7/9/2019 1:57 PM	Rate (1)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 12/29/2025 Posts: 36382 Rating: (4545)	c3ham Is it possible for a logo expansion module to use 12v inputs if the base unit is using 24v There is an expansion module for 12/24VDC. The inputs detect a DC voltage> 8.5 V as 1-signal and a DC voltage <5.0 V as 0-signal. LOGO! DM8 12/24R Order Number: 6ED1055-1MB00-0BA2
	Last edited by: ixo65 at: 07/09/2019 13:58:56
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users c3ham