Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Wincc 7.5 Smart Client

Created by: mistrermidoslals at: 4/30/2020 11:11 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

4/30/2020 11:11 AM	Rate (0)
mistrermidoslals Posts: 14 Rating: (0)	Hi , I want to know if possibile to connect my Wincc Scada Project to HMI with Smart Client, i check in list of strument but there is not smart client page like in TIA Portal. Attachment Capture.JPG (362 Downloads)
mistrermidoslals Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

4/30/2020 11:20 AM	Rate (0)
AmolGaikwad1200 Gold Member Joined: 2/5/2013 Last visit: 1/5/2026 Posts: 330 Rating: (75)	Hi mistrermidoslals, What exaclty you want? 1.access HMI screens using SCADA or 2.access SCADA screens using HMI. Br, AmolG.
	Please rate it.
Suggestion To thank Quote Answer

4/30/2020 11:37 AM	Rate (0)
mistrermidoslals Posts: 14 Rating: (0)	Access HMI screen from Scada
mistrermidoslals Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

4/30/2020 11:51 AM	Rate (0)
AmolGaikwad1200 Gold Member Joined: 2/5/2013 Last visit: 1/5/2026 Posts: 330 Rating: (75)	mistrermidoslals Access HMI screen from Scada Hi, May be below links are useful. 1.SIMATIC WinCC SmartClient.exe remote maintenance for SIMATIC HMI 2.Remote Access to SIMATIC HMI Operator Panels Br. AmolG
	Last edited by: Jen_Moderator at: 04/30/2020 12:15:41 Optimized links. Please rate it.
Suggestion To thank Quote Answer

4/30/2020 12:19 PM	Rate (0)
Willybong Silver Member Joined: 2/11/2015 Last visit: 1/8/2026 Posts: 515 Rating: (36)	Hi mistrermidoslasls, With a button and a vbscript you could call the SmartClient.exe program like: Execute "C:\...\SmartClient.exe -IP_Address_of_HMI"

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on