Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

611 A

Created by: gianca at: 11/20/2008 12:30 AM (1 Replies)

Rating (0)

Thanks 1

2 Entries

11/20/2008 12:30 AM	Rate (0)
gianca Posts: 1 Rating: (0)	what of difference between 6SN1121-OBA11 and 6SN1121-OBA13 they are interchangeable. thanks
gianca Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

11/20/2008 4:39 PM	Rate (0)
Dave Posts: 271 Rating: (29)	Hello Gianca, The 6SN1121-0BA11-0AA0 is a main spindle controller with an input for encoder feedback. The 6SN1121-0BA13-0AA0 is a main spindle controller with an input for encoder feedback and spindle signal output for external use. The signal output is a TTL quadrature signal for use with typically an external motion controller used for thread cutting, rigid tapping, etc. Hope this helps...
Dave Posts: 271 Rating: (29)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users S.M.H5011

|

Share this page:

Share this page on...

Follow us on