Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Convert a particular code from VBS to C-Script

Created by: mhike at: 5/20/2010 12:31 PM (3 Replies)

Rating (1)

Thanks 2

4 Entries

5/20/2010 12:31 PM	Rate (0)
mhike Posts: 41 Rating: (2)	Hi Everyone, Can somebody convert this to its equivalent C-Script? Dim x x = "NC," & Chr(34) & "S7 connection_2" & Chr(34) & "," & Chr(34) & "WinCC Application" & Chr(34) HMIRuntime.Tags("tag").Write x Value in the "tag" tag should be the same as the one you written in CScript. Thank you so much! I will use this for the software redundancy of the WinCC because the tags is in Named connections. Best regards, mhike
mhike Posts: 41 Rating: (2)
Suggestion To thank Quote Answer

5/21/2010 10:35 AM	Rate (1)
Romulus Gold Member Joined: 1/4/2010 Last visit: 12/16/2025 Posts: 651 Rating: (40)	Hi Is this example OK for you: char value[62]; strcat(value,"NC, "); strcat(value,"\""); strcat(value,"S7 connection_2"); strcat(value,"\", \""); strcat(value,"WinCC Application"); strcat(value," \" "); SetTagChar("tag",value);
	Regards Romulus Please give me answer if it works or if i can help you again. Sorry if my english isn't so comfortable.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users mhike

5/24/2010 3:50 AM	Rate (0)
mhike Posts: 41 Rating: (2)	Thanks man! Big Help :)
mhike Posts: 41 Rating: (2)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Romulus

11/23/2021 9:27 AM	Rate (0)
Jen_Moderator Posts: 8171 Rating: (174)	New question published by EngineerMan1 is split to a separate thread with the subject Convert code to VbScript. Best regards Jen_Moderator
Jen_Moderator Posts: 8171 Rating: (174)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on