Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

wincc reference application license

Created by: Hit_Formula at: 6/17/2010 7:19 AM (6 Replies)

Rating (0)

Thanks 0

7 Entries

6/17/2010 7:19 AM	Rate (0)
Hit_Formula Bronze Member Joined: 2/20/2010 Last visit: 10/15/2025 Posts: 104 Rating: (7)	dear all, I have configure 1 SERVER,1 ENG STATION, 3 OPERATOR STATION with WinCC 7.0 Sp1. I have configure WINCC APPLICATION into server Station and WINCC REFERENCE APPLICATION into other Operating Stations. and I have transfer Licenses RT128Powertag and WINCC SERVER into Server Station and RT128 powertag Lincese Transfer into other Operating Station. Now when i put my Operating Station into Runtime It shows Server license missing Error. Is that WINCC SERVER license required for all the Operation Station?

Suggestion To thank Quote Answer

6/17/2010 8:38 AM	Rate (0)
Yolov Silver Member Joined: 2/22/2006 Last visit: 11/29/2025 Posts: 291 Rating: (37)	Hi, please check project properties (right click over your projevt name and then Properties) of your operator station client project (see attachment). It should be Client Project. I suppose that you modify you server project to client project and you forgot to change project type. Regards

Suggestion To thank Quote Answer

6/17/2010 9:00 AM	Rate (0)
Hit_Formula Bronze Member Joined: 2/20/2010 Last visit: 10/15/2025 Posts: 104 Rating: (7)	Dear yolow, please upload the attachment.

Suggestion To thank Quote Answer

6/17/2010 10:58 AM	Rate (0)
Yolov Silver Member Joined: 2/22/2006 Last visit: 11/29/2025 Posts: 291 Rating: (37)	OK, sorry! It was file type problem. Regards Attachment project properties.JPG (365 Downloads)

Suggestion To thank Quote Answer

10/26/2015 2:32 PM	Rate (0)
nkr Bronze Member Joined: 5/9/2015 Last visit: 3/18/2025 Posts: 81 Rating: (4)	Hi All, Is there license required for the wincc reference application or not.? Best regards, Naresh Saini

Suggestion To thank Quote Answer

10/26/2015 3:40 PM	Rate (0)
bg2492 Posts: 7298 Rating: (2188)	Hello Naresh Saini, a reference application is a reference to an other real project (OS or OS-client) in the Simatic Manager. You use this, if you have for example 10 WinCC-Clients, and all of them should run the same project. In this case, you create one OS-Client-Projects and 9 references for it. You would not need a special licence for the references on the ES, but if you load the 10 target-OSes with their projects, every target-OS need a licence for running the project. Regards Georg Berghof
bg2492 Posts: 7298 Rating: (2188)
Suggestion To thank Quote Answer

1/25/2016 2:21 PM	Rate (0)
Min_Moderator Posts: 4758 Rating: (122)	New question published by nkr is split to a separate thread with the subject When activating runtime two errors appear. Best regards Min_Moderator
Min_Moderator Posts: 4758 Rating: (122)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

WinCC Installation Options General

Follow us on