Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Get an error when searching PLC - TIA V 10.5

Created by: Dilli at: 8/2/2011 1:07 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

8/2/2011 1:07 PM	Rate (0)
Dilli Posts: 122 Rating: (1)	Hello ! When I want to find PLC through "Online Acces" I get error: PLC Online : Function not implemented in loaded communication driver. How can I fix it ? OS Windows 7, TIA Portal V 10.5 SP2 Update 1. Thank you!
Dilli Posts: 122 Rating: (1)
Suggestion To thank Quote Answer

8/2/2011 2:32 PM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 12/6/2025 Posts: 1525 Rating: (231)	STEP 7 v10.5 is not supported with Windows 7. Also just after installing STEP 7 v10.5 you are having this error or you have already worked with STEP 7 v10.5 in Windows 7
	Like it? Rate it!
Suggestion To thank Quote Answer

8/2/2011 3:04 PM	Rate (0)
Dilli Posts: 122 Rating: (1)	Ganes10 STEP 7 v10.5 is not supported with Windows 7. Also just after installing STEP 7 v10.5 you are having this error or you have already worked with STEP 7 v10.5 in Windows 7 just after installing
Dilli Posts: 122 Rating: (1)
Suggestion To thank Quote Answer

8/2/2011 7:56 PM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 12/6/2025 Posts: 1525 Rating: (231)	Dilli just after installing Most probabllyit may be due to non-support of STEP 7 v10.5 Basic with Windows 7 OS. Check this STEP 7 Compatibility vs Windows Operating Systems
	Like it? Rate it!
Suggestion To thank Quote Answer

5/4/2015 3:20 PM	Rate (0)
Min_Moderator Posts: 4758 Rating: (122)	New question published by J the Engineer is split to a separate thread with the subject TIA Portal V13 SP1, ERROR: 'PLC Online : Function not implemented in loaded communication driver'. Best regards Min_Moderator
Min_Moderator Posts: 4758 Rating: (122)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on