Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

PLC download problem

Created by: Engin Safak at: 10/16/2011 3:40 PM (10 Replies)

Rating (1)

Thanks 1

Result pages:: |; 1 | 2; |

11 Entries

Entries per page: 10 | all

10/16/2011 3:40 PM	Rate (0)
Engin Safak Posts: 14 Rating: (0)	Hello I have some problems. There are same problems in two wire drawing machines . I changed one contact in the PLC block and i sent program to plc with download icon. I am taking error message Download (294:6) Unable to copy the block FC24. What does message mean? There is an interesting point. PLC accepted my first changing but PLC didn't accept other changing.PLC Protection level is three. Thanks
Engin Safak Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

10/16/2011 4:07 PM	Rate (0)
Ayman Elotaify Diamond Expert Joined: 5/28/2008 Last visit: 1/12/2026 Posts: 4522 Rating: (843)	Engin Safak Hello I have some problems. There are same problems in two wire drawing machines . I changed one contact in the PLC block and i sent program to plc with download icon. I am taking error message Download (294:6) Unable to copy the block FC24. What does message mean? There is an interesting point. PLC accepted my first changing but PLC didn't accept other changing.PLC Protection level is three. Thanks Hello, Error 294:6 triggered when you try to download an OB to a CPU and this OB is not supported by that CPU. Please recheck again that FC24 is called from a supported OB from your CPU. For further info about S7 error message, please find it here: Which meaning have the error codes (xxxx:yyyy) in STEP 7? Hope this helps.
	Ayman Elotaify
Suggestion To thank Quote Answer

10/16/2011 5:14 PM	Rate (0)
umencho Grandmaster Joined: 3/21/2006 Last visit: 1/10/2026 Posts: 10247 Rating: (1183)	Engin Safak ...PLC accepted my first changing but PLC didn't accept other changing.PLC Protection level is three. Thanks Hello, Do you know the password there in order to make a changes? Which type of CPU do you have? Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

10/18/2011 10:22 AM	Rate (1)
Aret Posts: 2348 Rating: (265)	Please ensure your new address is in permitted range - for example if you rewired some contact to I1500.0 on CPU, supporting 0..1023 bytes of input - it would be saved in S7 Manager, but it can't be downloaded to CPU.
Aret Posts: 2348 Rating: (265)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AutoGen_833938

10/19/2011 9:23 PM	Rate (0)
Engin Safak Posts: 14 Rating: (0)	My plc type is VIPA 313C. I talked VIPA service. He said sometimes download problems happening in this PLC. He suggested delete PLC andbackup send to PLC. Thanks for your help.
Engin Safak Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

2/21/2017 9:53 PM	Rate (0)
Jasmine-S Posts: 8 Rating: (0)	Hey there, I have used M0.0 to M0.2 so it is not out of range but the same error pops up "Unable to copy the block OB1". And one more thing; when I post something here it is hard to find/follow the post/page that I posted in. Is there any tips to follow own activity to not just to rely on own memory?! Regards
Jasmine-S Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

2/23/2017 5:53 PM	Rate (0)
Ste39 Posts: 4620 Rating: (710)	Farnas Hey there, I have used M0.0 to M0.2 so it is not out of range but the same error pops up "Unable to copy the block OB1". And one more thing; when I post something here it is hard to find/follow the post/page that I posted in. Is there any tips to follow own activity to not just to rely on own memory?! Regards Hello, You have only this two instruction in OB1 or other? Is VIPA PLC or SIEMENS? and on the left in the Navigation tree go to "Forum management" and then "My topics"
Ste39 Posts: 4620 Rating: (710)
Suggestion To thank Quote Answer

2/25/2017 10:01 PM	Rate (0)
Jasmine-S Posts: 8 Rating: (0)	Hey Thanks for your reply. I am new in this and it is siemens. Best
Jasmine-S Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

2/26/2017 1:59 PM	Rate (0)
Ste39 Posts: 4620 Rating: (710)	Farnas Hey Thanks for your reply. I am new in this and it is siemens. Best Hello, and then? Please explain, have you other function/ block in OB1?
Ste39 Posts: 4620 Rating: (710)	Last edited by: Ste39 at: 2/26/2017 7:33:38 PM
Suggestion To thank Quote Answer

2/27/2017 8:58 AM	Rate (0)
mopS04 Posts: 5521 Rating: (1058)	hi, please show us a screenshot of your code. and also tell us which CPU you use. hope this helps, regards,
mopS04 Posts: 5521 Rating: (1058)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on