Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Sinumerik 805 - RS-232 Question

Created by: jmsajdak at: 12/7/2011 4:27 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/7/2011 4:27 PM	Rate (0)
jmsajdak Posts: 1 Rating: (0)	We have a Sinumerik 805 6FC4100-1AA00-Z (Software Version 4.6) it is the controller for a Hyundai HiT-8G Lathe. We are working on connecting it up to a PC to transfer programs back and forth. When trying to set the RS-232 interface options (Data Rate, Parity, etc.) nothing happens on the screen, the spots on the screen which display the current settings are all blank. I was wondering if these settings would be displayed even if a serial cable isn't connected.
jmsajdak Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

12/9/2011 4:56 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (485)	jmsajdak We have a Sinumerik 805 6FC4100-1AA00-Z (Software Version 4.6) it is the controller for a Hyundai HiT-8G Lathe. We are working on connecting it up to a PC to transfer programs back and forth. When trying to set the RS-232 interface options (Data Rate, Parity, etc.) nothing happens on the screen, the spots on the screen which display the current settings are all blank. I was wondering if these settings would be displayed even if a serial cable isn't connected. Hello.... Check this informations may be useful. Regards, Prakash Attachment Data transfer via WinPCIN or SinuComPCIN.pdf (669 Downloads)
Ekalavya Posts: 2964 Rating: (485)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on