Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Alarm report

Created by: sullivan87 at: 2/22/2012 10:01 AM (3 Replies)

Rating (1)

Thanks 1

4 Entries

2/22/2012 10:01 AM	Rate (0)
sullivan87 Posts: 4 Rating: (0)	I am using wincc v7.0 , i create a report layout provided with alarm control (Classic) which i can sepcify the alarm numbers i want to print and i choose hitlist under Active list upon picture option , But when i print the report ,the hitlist columns printed are the default (numbers, Frequency, Average +/-,Average +/1,Average +/2) even i modify it on the alarm control classic in the graphics to (Numbers, Message text, point of error) , and hitlist tab is not available option in the wincc alarm control classic in the report layout Note: i connect this report to a print job printed by button pressed using standard C- Action function RPTJobPrint
sullivan87 Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

2/23/2012 10:37 AM	Rate (1)
April Posts: 1776 Rating: (95)	Hi, What you select with parameter assignment general tab Hit list is only the selection of the data. for layout open the tab messagelists and parametrize the message blocks for print layout. maybe also you have to parametrize the message blocks, if they are not available in the message lists.
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users keshtkarannn

9/16/2015 12:33 PM	Rate (0)
Koen D Posts: 1 Rating: (0)	Hello all, I'm facing the same problem. Can not print other columns than described by Sullivan87. The tabpage showing the message blocks and message list do not have the columns with the hit list data like "Frequency, Average +/-,...) A second problem is that I need to print 2 hit lists in the same report. But my second list contains the same data as the first list. Filters are applied by assigning 2 different tags to the dynamic paramater MSGFilterSQ of each list.. The used object is: WinCC Alarm Control Classic. Thanks, Koen.
Koen D Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

6/29/2017 2:24 PM	Rate (0)
Jen_Moderator Posts: 8171 Rating: (174)	New question published by phamtam is split to a separate thread with the subject How to export report hit list from Alarms wincc on process historian?. Best regards Jen_Moderator
Jen_Moderator Posts: 8171 Rating: (174)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

WinCC Alarms Messages

Follow us on