Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

SIMATIC Manager

Created by: ibraba at: 11/11/2012 1:02 PM (6 Replies)

Rating (1)

Thanks 0

7 Entries

11/11/2012 1:02 PM	Rate (0)
ibraba Posts: 22 Rating: (1)	Hello to all I've got a pc where I've founded SIMATIC MANAGER; but I don't know what it's used for I want to upload from S7 200 plcs,can I use the SIMATIC Manager? Please can someone tell me a link where I can find the user manual for SIMATIC Manager Hope to read you soon Best regards
ibraba Posts: 22 Rating: (1)
Suggestion To thank Quote Answer

11/11/2012 1:33 PM	Rate (1)
Saggy Silver Member Joined: 11/8/2011 Last visit: 10/15/2025 Posts: 387 Rating: (43)	Hi ibraba , If you want communicate with s7200 then you should use s7 microwin

Suggestion To thank Quote Answer

11/11/2012 1:42 PM	Rate (0)
dchartier Grandmaster-Expert Joined: 9/27/2006 Last visit: 12/26/2025 Posts: 12474 Rating: (2722)	Hello Ibraba; Simatic Manager is thecontainer for the combined utiities required to program a S7-300 or S7-400 PLC. Step 7/Microwin is the software required to program and communicate with a S7-200 PLC. You will useSimatic Managerto configure the hardware, program (in ladder, FBD or STL languages) the control logic, establish the network connections, upload and download to the S7-300/400 CPUs. Here are a few basic Step 7 (Simatic Manager) manuals: SIMATIC Working with STEP 7 V5.5 SIMATIC Programming with STEP 7 V5.5 Working with STEP 7 V5.4 Getting Started And for your further training (eventually) a link to S7-300 tutorials porovided by Siemens that you should look at: http://www.automation.siemens.com/mcms/sce/en/advanced_training/training_material/download_training_material/Pages/Default.aspx Hope this helps, Daniel Chartier

Suggestion To thank Quote Answer

11/12/2012 8:48 AM	Rate (0)
eng_semsem Posts: 144 Rating: (1)	I want to upload from S7 200 plcs,can I use the SIMATIC Manager? -It is impossible, but to do so must be installed Microwin good luck
eng_semsem Posts: 144 Rating: (1)	Last edited by: eng_semsem at: 11/12/2012 8:49 AM
Suggestion To thank Quote Answer

5/31/2014 6:57 PM
Yahu Posts: 59 Rating: (1)	Dear ibraba actualy Simatic manager is Used for s7300 and s7400 CPU but you used Microwin for s7200 Cpu microwin is software for s7200 Cpu i hope its useful for u regard shailesh
Yahu Posts: 59 Rating: (1)
Suggestion Quote Answer

5/31/2014 7:05 PM
Shekhu Advanced Member Joined: 3/25/2009 Last visit: 4/22/2025 Posts: 36 Rating: (1)	ibraba Hello to all I've got a pc where I've founded SIMATIC MANAGER; but I don't know what it's used for I want to upload from S7 200 plcs,can I use the SIMATIC Manager? Please can someone tell me a link where I can find the user manual for SIMATIC Manager Hope to read you soon Best regards Hi , simatic manager is used for the programming of the S7-300 and 400 range of PLC . And for S7200 plc you need Microwin software. Regards shekhar

Suggestion Quote Answer

5/31/2014 9:22 PM
Marcjan Diamond Member Joined: 4/22/2010 Last visit: 3/31/2025 Posts: 5697 Rating: (716)	Come on guys, I think after 2 yearsibraba knows. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion Quote Answer

|

Share this page:

Share this page on...

Follow us on