Greetings,

I'm rather new to the LOGO world and am working on a little project to show inclination.

Output of the Turck Inclinometer device is 0.1V-4.9V.

AI1 - Out Clockwise

AI2 - Out Counter Clockwise

0.1V would be -15°

4.9V would be 15°

I've seen a similar situation on a distance measuring device on here, tried to modify the program to display inclination with no luck.

If possible, i am looking for some assistance on a diagram to display what i am trying to achieve.

Any help is appreciated!

Thank you,

JARED

ixo65

Something like this?

 I tried to replicate your diagram, somewhere along the line I have something out.

I also had a wiring issue I am playing with.

ixo65

Take a look at the attachment.

 This shows exactly what I was looking to accomplish, really appreciate that.

For some reason, I have my CW and CCW inputs in I7 and I8, and getting stand still reading of just 10v on AI1, and 0 volts on the AI2, according to the wiring diagram I was provided, that is how it should be I would believe.

ixo65

Are the power supply of the Inclinometer the same as for the LOGO!?

That would be correct.
I have both the LOGO! and Inclinometer wired to the same 110VAC to 24VDC converter.
Currently wired as such.