Hello Together,

I have CPU 315-2AH14-0AB0 that is connected with lot of devices on DP and MPI. Most of DP devices are VFDs, which we plan to switch to PN, due to DP phase out at VFD's supplier.

My plan was to use CP343-1 communication card, but when I add it in HW configuration, I am not able to create PN network and connect PN devices. So, I am confused why this is happening…

Please support.

BR,

Branislav

madnesssm

Hello Together,

I have CPU 315-2AH14-0AB0 that is connected with lot of devices on DP and MPI. Most of DP devices are VFDs, which we plan to switch to PN, due to DP phase out at VFD's supplier.

My plan was to use CP343-1 communication card, but when I add it in HW configuration, I am not able to create PN network and connect PN devices. So, I am confused why this is happening…

Please support.

 What is the order number of the CP module?

Hello,
Order number for CP is: 6GK7343-1EX30-0XE0

madnesssm

Hello,
Order number for CP is: 6GK7343-1EX30-0XE0

 Have you configured it as PROFINET IO controller or PROFINET IO
device? If you have set is as IO device, then you can't add a new PN network or PN devices to it.

Hello,

Unfortunately 6GK7 343-1EX30-0XE0 I can not configure as PROFINET IO controller, there is no option in the properties:

But if I replace with 6GK7 343-1EX21-0XE0, then I am able to configure as PROFINET IO controller:

Unfortunately then I have another issue when I want to add Siemens G120 from catalogue:

Please support.