AutoGen_365337

I saw the s7-300 module manual about  64DI module,  6ES7321-1BP00-0AA0. It says it can be supported by ET200M, like 6ES7153-1AA03-0XB0,E12. But  when i use it in  my project it doesn't work. Both SF and BF light are red.

Who can help me? or give me more detailed file about this module. Thank you!

 Hello,

I don't know if it is your problem but if you read in the manual of the S7 300 Modue data wrote:

DI 64

PROFIBUS

● IM 153-1, as of 6ES7153-1AA03-0XB0, E12 with GSD file SI01801D.*, version V 1.5

Go to page 67:

https://support.industry.siemens.com/cs/ww/en/view/8859629 

Hi

If you can configure the hardware in HW config and after running "save and compile" and "Consistency check" from Station menu, it gives no error, there is no problem with your configuration.

According to your Screen shot I suggest the followings:

1. Check the exact order number from right side of the modules (Not from the front door). 

2. Check the Profibus wiring and connectors

3. Check the Profibus address on the IM module.

4. Check the module power and backplane bus is OK.

5. Check your Module is healthy.

Off topic:

Hello AutoGen_365337,

for future: Please make with the screenshot a ZIP archive and don't make a own post for every screenshot alone.

Thanks.

 I'm sorry,I didn't think of that.

ixo65

Off topic:

Hello AutoGen_365337,

for future: Please make with the screenshot a ZIP archive and don't make a own post for every screenshot alone.

Thanks.

AutoGen_365337

I think IM153-1 is not friendly to DI64 module as they say. I have called the technical supporter waitting for reply.

I have never met this kind of things before.

Hi

Usually when you can configure a HW and it gives no error, it should work fine. Anyway, as you said they may not be friendly (this is the last thing that I would say).

When they answered you or you solved it, I would like to hear more from you.

Good luck