Hello,

i would need to put RF680R into operating system on my software PLC WinAC RTX (IPC277D 9"). For now i set hardware on PLC and everything is green tick. But when i try to use any commands like Reset reader, that doesn't work and i get the Status from the block 16#0000_8092. I attached some pictures showing my configuration and the status i get.

I examined next manuals about how the connection should be set but didn't found anything useful about that status:
RFID Basic Examples: SIMATIC RF600 vi
a PROFINET without Communication Module
https://support.industry.siemens.com/cs/si/en/view/109483373

I also read that the problem could be, if there is an error in the operating system of the computer, were the winac cpu software is installed. I checked that and the operating system looks ok. No alarms and no blue screens.


I am using Tia portal v13 SP1 update 9.
IPC277D: Simatic WinAC RTX (6ES7 611-4SB00-0YB7) V4.6.1
Windows on IPC: Windows Embedded Standard SP1

Any help would be appreciated.

 

Hi Owei,

thank you for your replay, want to let you know, that we just fixed the issue.

Looks like the Siemens library "SIMATIC Ident" version V3.0 does not work with WINAC RTX.
I changed the version to V2.0 and now it works.