Peterako

What i understood is that your PC communicates by use of the logosoft with the logo! plc. And that the Mobil in the same IP range and subnet does not see the logo ip adress.

in that case within the LOGOSOFT and the PLC program loaded select ALT + ENTER go to online settings login to your PLC by its IP address and then select acces control in the list select web server and its password.

I think this will solve your problem........

 Hello, I have the same problem and I have tried your solution but it did not work. I still can't access the LOGO8 web server from my phone. Can you think of another solution? Thank you so much!

------------------------------------------------------------------------------------------
Split from web serve logo 8 comunication for android mobile.

kaprissss

I have a communication problem with my logo 8 24ce, fw 1.081.02

It is connected to a port of my wifi router and the PC connected to another port of the mimo router. Configured from the PC through logosofconfort the web server. From the pc I access without problems to the web server, but from the android phone connected via wifi to the same network I can not. In the router does not appear neither the mac nor ip of the logo, it is as if I was not connected to it. It is possible that the logosoftcomfor creates a subnet within the same network. I am blocked I do not know how I can access the web server from my phone. Thanks for everything.

 Hi,

you wrote you can use the web-server with your PC. Your PC is connected via ethernet cable also to the router. Your router supports WiFi. But you cannot use the web-server with your mobile devices connected to your WiFi net work.

Try:
Disconnect the ethernet cable of your PC and connect it via WiFi. Try if you get access to the Web-server.

Check all IP settings. Also the subnet and the gateway must be the same.

Change the DHCP range of your router so the fixed IP-Adresses are not in the DHCP range.

Check your router if new devices are blocked by the router settings (MAC filter, ...)

Check if the web-browsers of your mobile devices allow access to unsecure web-pages. If not, then you cannot use the web-server of your LOGO! 8.1.

Check if you have access to other devices in your WiFi network with your mobile devices (router settings)

Hope this helps  

AutoGen_380038

Escribe que puedes usar el servidor web con tu PC. Tu PC también está conectada al enrutador mediante un cable Ethernet. Su enrutador admite WiFi. Pero no puedes usar el servidor web con tus dispositivos móviles conectados a tu red WiFi.

Prueba:
Desconecta el cable Ethernet de tu PC y conéctalo a través de WiFi. Prueba si tienes acceso al servidor web.

Verifique todas las configuraciones de IP. Además, la subred y la puerta de enlace deben ser las mismas.

Cambie el rango DHCP de su enrutador para que las direcciones IP fijas no estén en el rango DHCP.

Verifique su enrutador para ver si los nuevos dispositivos están bloqueados por la configuración del enrutador (filtro MAC, ...)

Compruebe si los navegadores web de sus dispositivos móviles permiten el acceso a páginas web no seguras. En caso contrario, no podrá utilizar el servidor web de su LOGO! 8.1.

Comprueba si tienes acceso a otros dispositivos en tu red WiFi con tus dispositivos móviles (configuración del router)

Espero que esto ayude  

 ¡Resuelto! El problema era que logo8 estaba fuera del rango de IP del router wifi y de mi pc. ¡Muchas gracias por su ayuda!

Hello Labsyva,

Labsyva

Solved! The problem was that logo8 was out of IP range of the wifi router and my pc. thank you very much for your help!

Best Regards,

Wit_Moderator