Hello, I would like to know the connection limits of a network structure. I have a system structured as follows:

• Logo V8.4 Master
• Logo V8.4 Slave
• Logo TDE
• A Web page connected to the master

I am unable to access the VM Parameterization section, which I need to complete the web server page.

AutoGen_7477671

I am unable to access the VM Parameterization section, which I need to complete the web server page.

What do you exactly mean with this? 

I mean that I cannot select the 'VM Parameterization' option at all; I see it grayed out, and I am unable to select it.

Which LSC version use you?

Which LOGO! have you exactly? Please write the complete order number.

Which LOGO! have you selected in the device selection?

I have updated everything to the latest version to use LOGO! V8.4, so: LSC v8.4 LWE v1.2.1 FW 1.84.03 LOGO! 8.4

At the moment, I am unable to access the full code, so I will try to explain my situation as precisely as possible.

I have built a system using two LOGO! controllers in a network project because I reached the maximum number of digital and analog inputs on the first device (naturally integrating the maximum number of additional modules). Additionally, I have included a LOGO! TDE panel in the control cabinet for parameter management and alarm visualization. I also created a web page with LWE to display the system status.

Everything has been working perfectly up to this point.

The problem arose from the need to change parameters remotely—that is, to modify the internal values of the logical blocks in the program. To integrate this into LWE, I need to map these variables in the "VM Parameterization" section, but I am currently unable to select it.

Thank you very much for your attention.

I'm not familiar with this error.

I also have LOGO! 8.4 (V1.84.03), LSC V8.4.1, and LWE V1.2.1.

I'm not having any problems.

If is it possible then upload your LSC project.