Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SOLVED> Can MC_ChangeDynamic be used while axis is active?

Created by: William_B at: 11/21/2011 1:46 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

11/21/2011 1:46 PM	Rate (0)
William_B Posts: 5225 Rating: (1196)	Hi all. Let us say an axis is activated (and it is moving) by means of a command -- MC_MoveRelative -- MC_MoveVelocity -- MC_MoveAbsolute -- MC_MoveJog Does MC_ChangeDynamic have any influence or are changes in the movement dynamic changed after the movement has been stopped? Greetings.
William_B Posts: 5225 Rating: (1196)	Last edited by: William B. at: 11/25/2011 4:06 PM title: solved
Suggestion To thank Quote Answer

11/25/2011 3:38 PM	Rate (0)
FreakOnALeash Posts: 267 Rating: (24)	Hello again, as you can see the dynamic changes takes effect with the next start of the functions. Attachment Config_DynamicDefaults_tag.pdf (919 Downloads)
FreakOnALeash Posts: 267 Rating: (24)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users _amo13

11/25/2011 4:06 PM	Rate (0)
William_B Posts: 5225 Rating: (1196)	FreakOnALeash ..as you can see the dynamic changes takes effect with the next start of the functions. Hi-ya! I should really have seen this in the documentation by myself. Thank you. C-ya.
William_B Posts: 5225 Rating: (1196)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SIMATIC Motion Control

Follow us on