Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

G120_CU250S2

Created by: AutoGen_6913016 at: 3/10/2024 10:19 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/10/2024 10:19 PM	Rate (0)
AutoGen_6913016 Joined: 11/15/2022 Last visit: 3/21/2024 Posts: 3 Rating: (0)	Hello everyone. I have G120_CU250S2- with incremental encoder TTL 1024 attached on induction motor shaft, The application as following: The encoder will be connected direct to G120_CU250S2 by terminals and G120_CU250S2 will be connected to S7-1513 CPU by profinet. I need to control motor positioning by technology object (TO) by getting position feedback from the encoder. This the first time for me with closed loop control, Please could you help me by example application or related documents of my application etc.... Thank you.

Suggestion To thank Quote Answer

3/11/2024 2:36 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/18/2024 Posts: 22453 Rating: (3030)	https://support.industry.siemens.com/cs/ww/en/view/81666970 https://support.industry.siemens.com/cs/ww/en/view/109479977

Suggestion To thank Quote Answer

3/11/2024 8:47 PM	Rate (0)
AutoGen_6913016 Joined: 11/15/2022 Last visit: 3/21/2024 Posts: 3 Rating: (0)	Thank you Mr. ChristophD for your help, I need example application to control position of the drive (G120_CU250S2) and get encoder value which is connected direct to drive not to CPU. Please if you can help me.
	Last edited by: AutoGen_6913016 at: 03/11/2024 20:49:17
Suggestion To thank Quote Answer

3/12/2024 2:23 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/18/2024 Posts: 22453 Rating: (3030)	in the links you find the application examples and description. i don't understabd what exactly you missing
	Last edited by: ChristophD at: 03/12/2024 02:27:56
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on