Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinLC on notebook

Created by: dinkerman at: 5/8/2013 10:52 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/8/2013 10:52 AM	Rate (0)
dinkerman Posts: 1 Rating: (0)	I would like to use WinLC to use the notebook like a control for ethernet network where I have ethernet device like et200. It will work with every kind of ethernet board or I need "special" ethernet adapter? I mean the "normal" ethernet board that is already on every notebook.
dinkerman Posts: 1 Rating: (0)	Last edited by: dinkerman at: 5/8/2013 10:53 AM
Suggestion To thank Quote Answer

5/8/2013 11:14 AM	Rate (0)
Moldi Posts: 89 Rating: (7)	Hello! Our Soft-PLC, WinAC RTX, as a special deterministic system needs a special ethernet controller for use a non SIMATIC indutrial PCs. Please have a look into to technical data of WinAC RTX: http://support.automation.siemens.com/WW/view/en/44388946/td and/or also at the manual at page 125: http://support.automation.siemens.com/WW/view/en/43715176 There you can find the chipsets who are supported with WinAC RTX. When you need some periphery like ET200SP, then please contact your local Siemens sales. Siemens contacts: https://www.automation.siemens.com/mcms/aspa-db/en/automation-technology/Pages/default.aspx regards
Moldi Posts: 89 Rating: (7)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on