Navigation

Configure a WPA 2 key in Iot Setup

Created by: cgodoyv at: 10/26/2022 11:47 PM (1 Replies)

10/26/2022 11:47 PM	Rate (0)
cgodoyv Member Joined: 8/24/2020 Last visit: 11/12/2024 Posts: 4 Rating: (0)	Hi. Is there any way to config a WPA 2 key in IotSetup? ------------------------------------------------------------------------------------------ Split from How to add USB Wi-Fi connection?.
	Last edited by: Jen_Moderator at: 10/27/2022 08:17:15 New subject after splitting
Suggestion To thank Quote Answer

11/2/2022 7:53 AM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/12/2024 Posts: 3345 Rating: (379)	Hi and sorry for the late response.. Seems like we automatically use WPA2. You can check with the command wpa_cli status when you WiFi is connected. This will give you root@iot2000:~# wpa_cli status Selected interface 'wlan0' bssid=d4:3f:cb:9a:a8:69 freq=0 ssid=<censored> id=0 mode=station pairwise_cipher=CCMP group_cipher=CCMP key_mgmt=WPA2-PSK wpa_state=COMPLETED ip_address=<censored> address=<censored> uuid=<censored> Best regards!
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer