i have configured this SRCM Pressure monitoring device , i need 4th parameter to be configured  for User defined.

i want to use parameter 4 as bacnet  , but is not communicating with other bacnet devices .

i have entered the instance address and object identifier correctly.

please any one can support.

i am searching in products to open ticket ,it is not available in Siemens support products.

"SRCM"

Hello Alijaz;

When you speak of SRCM room pressure monitors, été you refering tp thèse models from Setra?

https://www.setra.com/product/room-pressure-monitors

In that case, is it possible that the answers to your question on Bacnet for SCRM modules would best be answered by Setra technicians and documentation?

Hope this helps,

Daniel Chartier 

this is siemens product Siemens SRCM and not of Setra,  part number is 547-318B.

i have attached data sheet for your reference .

Hello Aijaz;

Thank you for the document you provided on Siemens SCRM. 

Reading the document provided me with 2 basic informations:

- this product is distributed by Siemens Building Technologies, a division I have not much interaction with. So my main suggestion would be to contact SBT distributors and/or technicians for detailed help on this product including the following important detail:

- the part number you quoted shows that this particular unit does not use Bacnet MSTP, but connects with Siemens P1 protocol (see the screenshot below).I have no idea how this protocol exchanges data and if it can be used along with Bacnet. This is the type of clarification you should be asking SBT personnel.

Hope this helps,

Daniel Chartier