Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

416F-2 CPU Stop Problem.

Created by: halukman at: 2/21/2010 2:34 AM (3 Replies)

Rating (0)

Thanks 2

4 Entries

2/21/2010 2:34 AM	Rate (0)
halukman Posts: 5 Rating: (0)	Dear Expert. I have 2 CPU 416F-2 eat. DP-DP coupler are communication via s Plc. Changing input for safety Plc. After taking the program to compile Plc plc whether the circuit is run. So far so normal. But I've added a new address into the input when a stop plc falls. I kindly request your help in this regard.
halukman Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

2/21/2010 1:00 PM	Rate (0)
yy1 Gold Member Joined: 3/24/2009 Last visit: 7/9/2024 Posts: 535 Rating: (112)	Dear halukman, what do you mean with 'added a new address' - a new module / a new communication? If so, did you download the HW-configuration of your program? If your problem still persists, can you please publish the content of your diagnostic buffer? Best reagrds, yy1

Suggestion To thank Quote Answer

2/21/2010 7:41 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating: (1181)	Also if it is possible attach copy of hardware configuration here. Will helps to understand your issue. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

2/23/2010 11:13 PM	Rate (0)
halukman Posts: 5 Rating: (0)	Hi... Thanx your relation...My problem is ok... Main problem is safety compile editor...
halukman Posts: 5 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users UMENCHO yy1

|

Share this page:

Share this page on...

Follow us on