Navigation

Can I use OPC UA to read torque values on 1FK7032-2AK71-1CH1 Servo

Created by: bryanbr at: 7/24/2024 4:23 PM (1 Replies)

7/24/2024 4:23 PM	Rate (0)
bryanbr Joined: 5/18/2024 Last visit: 8/12/2024 Posts: 3 Rating: (0)	Hi Team, I'm fairly new to OPC UA and PLC datablocks. We have several 1FK7032-2AK71-1CH1 Servo motors controlling some twisting scenarios. We are looking to measure torque and visualize graphically to find out if/when bearings are failing on our twisting mechanism. Can someone guide me if it is possible to read the torque (or temperature) values via OPC UA on the PLC? If so, which datablocks are typical for reading? Thank you in Advance. And sorry if these are newbie questions. ~Bryan
	Last edited by: bryanbr at: 07/24/2024 16:24:18
Suggestion To thank Quote Answer

7/25/2024 2:06 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 11/14/2024 Posts: 5941 Rating: (816)	Hello, if necessary you have to read the data from the drive. For this you can use this application example. https://support.industry.siemens.com/cs/ww/en/view/109479553 For communication via OPCUA there is the following example. https://support.industry.siemens.com/cs/ww/en/view/109756885
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users bryanbr