Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Can we see the Status of Rack1 CPU through MPI/Ethernet in Hotbackup(400 series)

Created by: Maha at: 9/3/2009 4:39 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

9/3/2009 4:39 AM	Rate (0)
Maha Posts: 118 Rating: (4)	Dear All, I am having one basic question in Hotbackup that, can we see the Status of Rack 1CPU through MPI/Ethernet regardless of the status of the Rack 0 CPU.
Maha Posts: 118 Rating: (4)
Suggestion To thank Quote Answer

9/3/2009 11:00 AM	Rate (0)
gcor Advanced Member Joined: 7/17/2008 Last visit: 10/25/2013 Posts: 34 Rating: (2)	Hi Maha, Sorry, but Idon't know if I completely understood you question. If you need to connect a Varaible Table to the rack1 instead of rack0,you could use the menu: PLC > Accessible CPU With this option you could choose wich PLC you want to get online. Anyway if you want to go online with blocks and VATs, I usually make a copy of the S7 program folder and paste if in the project root. With this trick, if you try to connect from this new pasted folder, you will use actually the Accessible CPU Command. I attach a picture where you can see how to make that copy n' paste. Regards Attachment online.JPG (252 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Maha

9/4/2009 5:40 AM	Rate (0)
Maha Posts: 118 Rating: (4)	Hi gcor, Thank You verymuch..This is what i expected..........i tested its working fine.........
Maha Posts: 118 Rating: (4)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on