Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

DI as HW interupt

Created by: Sasha at: 11/17/2006 2:15 PM (9 Replies)

Rating (0)

Thanks 0

10 Entries

11/17/2006 2:15 PM	Rate (0)
Sasha Posts: 17 Rating: (0)	Can same DI be declared as HW interupt in Step7? Thanx.
Sasha Posts: 17 Rating: (0)
Suggestion To thank Quote Answer

11/17/2006 3:26 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 11/11/2024 Posts: 8768 Rating: (1170)	Hello Sasha, Please can you explain what you want? Best regards, Wizard

Suggestion To thank Quote Answer

11/17/2006 5:38 PM	Rate (0)
Sasha Posts: 17 Rating: (0)	Hello Wizard, I have 47 "DI32xDC 24V " in my sistem. Few of them are very important and it would be really nice if they can raise HW interupt if they are 1 because I need to react pretty quickly. Thank you for reply, Best regards.
Sasha Posts: 17 Rating: (0)
Suggestion To thank Quote Answer

11/20/2006 11:28 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 11/11/2024 Posts: 8768 Rating: (1170)	Hello Sasha, You are using the 32di, I think it's 6ES7 321-1BL00-0AA0, in that case it's not possible to react very fast by using a HW interupt It's however possible, when you use 6ES7 321-7BH01-0AB0 ( 16di), here it's possible to parametrize a HW interupt for each channel. Best regards, Wizard

Suggestion To thank Quote Answer

11/20/2006 1:52 PM	Rate (0)
Sasha Posts: 17 Rating: (0)	Helllo Wizard, thank you for replaying, I'm using 6ES7 422-1BL00-0AA. Can you recommended some other solution for my problem? I need to react very fast for some of DIs positive edge detection. best regards Sasha
Sasha Posts: 17 Rating: (0)
Suggestion To thank Quote Answer

11/20/2006 2:14 PM	Rate (0)
Smurf Silver Member Joined: 9/28/2005 Last visit: 10/24/2024 Posts: 414 Rating: (28)	Hi, Just a few possibilities: - Use a very fast CPU - program at different stages in your program something with PIW and the input word adress and compare the state with the last state. e.g. .. .. compare actual value PIW100 with "OldValue" if equal then goto normal else take special action, because something changed end_if normal: store the actual value as "OldValue" .. .. Note! Always make sure that you do the action "store the actual value as "OldValue"" after the compare.
	Smurf "The only difference between a problem and a solution is that people understand the solution."
Suggestion To thank Quote Answer

11/20/2006 2:18 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 11/11/2024 Posts: 8768 Rating: (1170)	Hello Sasha, With the 6ES7 421-1BL00-0AA0 it's also not possible In the S7-400 serie you can choose for the following options: 6ES7 421-7BH01-0AB0 (16di) or 6ES7 421-7DH00-0AB0 (16di) Here you can parametrize an interupt for rising edge or falling edge. Best regards, Wizard

Suggestion To thank Quote Answer

11/20/2006 3:45 PM	Rate (0)
Sasha Posts: 17 Rating: (0)	Thank you guys for reply, I cannot change module. I'm asking if there is some other way to react immediatly at change value then HW interupt (not possible) and regular IF in code (I think it's too slow and NOT secure). Those DI are someking of E-stop and that's reason why I need that speed and confidence.
Sasha Posts: 17 Rating: (0)
Suggestion To thank Quote Answer

11/24/2006 8:15 PM	Rate (0)
Remark Bronze Member Joined: 9/1/2006 Last visit: 8/1/2024 Posts: 193 Rating: (13)	Hi sasha, If it is safety related a hardware solution might be the only correct one. One other idea might be to use a timer OB if that is available in your CPU. Set it at the fastest cycle possible (some can be set at 1 mSec dependig on the CPU) and program as little code in the OB as possible since it runs very often. You should read your inputs using L PIW xxx and mask the required inputs to quickly check if one of the tricky inputs are activated then take action. Best regards, René
	Last edited by: Remark at: 11/24/2006 8:16 PM
Suggestion To thank Quote Answer

11/26/2006 1:01 PM	Rate (0)
Sasha Posts: 17 Rating: (0)	Thank you remark, thats best idea. Best regards Sasha
Sasha Posts: 17 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on