Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SIMATIC S7-400H, 412-3H SYSTEM-BUNDLE H-SYSTEM WITH 2XMC 1MB RAM, 1XUR2-H, 2XPS 405 10A, DC 24/48/60V 4 X SYNC MODULE 10M 2 X SYNC CABLE 1M 2 XCPU 412-3H 4XBACKUP BATTERIES

Created by: matlogik at: 10/13/2012 4:30 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

10/13/2012 4:30 AM	Rate (0)
matlogik Posts: 1 Rating: (0)	hi, I'm new to the system. just wondering if someone can direct me to the relevant catalog, user manual and O&M manual for the above titled. thanks in advance.
matlogik Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

10/14/2012 7:42 AM	Rate (0)
Saggy Silver Member Joined: 11/8/2011 Last visit: 11/5/2024 Posts: 387 Rating: (43)	Hi matlogik her you can find the technical specification of 412-3h Hope this helps

Suggestion To thank Quote Answer

10/14/2012 1:29 PM	Rate (0)
dchartier Grandmaster-Expert Joined: 9/27/2006 Last visit: 11/16/2024 Posts: 12294 Rating: (2691)	Hello matlogik; A system-bundle is simply a collection of hardware required to setup a complex unit. In your case the system bundle contains equipment required to setup a H-system CPU. Think of it as going to McDonalds and ordering a trio. You get the standard meal order, complete, but no changes allowed. From the manual proposed in Saga's link (see the attachment for an illustration): Requirements The following requirements must be met: A correctly installed and valid version of the STEP 7 basic software on your programmingdevice; see section Configuring with STEP 7 (Page 191). Any necessary hardware updates are installed. The modules required for the hardware setup available: An S7-400H automation system consisting of: – 1 UR2–H rack – 2 PS 407 10 A power supply units – 2 H–CPUs – 4 synchronization modules – 2 fiber-optic cables The same manual (Simatic High-Availabilty System S7-400H) also shows how to configure your S7-400H, program it, connect redundant and non-redundant IOs, etc... So start by studying it properly, and come back to us or use the Search functionnality on the forum (see the Search box at the right of this page) in order to find further information. Hope this helps, Daniel Chartier Attachment S7-400H assembly.jpg (315 Downloads)
	Last edited by: dchartier at: 10/14/2012 1:30 PM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users H-H

|

Share this page:

Share this page on...

Follow us on