Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

siwarex fta in stand_ alone mode

Created by: jafarreihani at: 10/21/2006 2:53 PM (6 Replies)

Rating (0)

Thanks 0

7 Entries

10/21/2006 2:53 PM	Rate (0)
jafarreihani Posts: 5 Rating: (0)	we have a siwarex fta module. after change the firmware this device is not work properly and no command is execute. what can we do? and how can we use siwarex fta in stand_alone mode.(without SIMATIC CPU)
jafarreihani Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

10/23/2006 9:47 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 11/11/2024 Posts: 8768 Rating: (1170)	Hello, Have you seen the manual: http://support.automation.siemens.com/WW/view/en/17970155 Chapter 4.2 Best regards, Wizard

Suggestion To thank Quote Answer

10/31/2006 3:03 PM	Rate (0)
jafarreihani Posts: 5 Rating: (0)	thanks but , first , we have a big problem! module is not work properly and no command is execute. if posible,please help us.
jafarreihani Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

11/3/2006 11:01 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 11/11/2024 Posts: 8768 Rating: (1170)	Hello, I understand, you have done a firmware update. Then the Siwarex is not responding to commands? Have you tried to do the firmware update again? Best regards, Wizard

Suggestion To thank Quote Answer

11/4/2006 1:15 PM	Rate (0)
jafarreihani Posts: 5 Rating: (0)	hallo; Yes , We have done firmware update several times but the Siwarex is not responding to commands again ![:(] thanks.
jafarreihani Posts: 5 Rating: (0)	Last edited by: jafarreihani at: 11/4/2006 1:16 PM
Suggestion To thank Quote Answer

11/6/2006 4:29 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 11/11/2024 Posts: 8768 Rating: (1170)	Hello, I think you should contact Support Hotline. Best regards, Wizard

Suggestion To thank Quote Answer

11/17/2006 3:49 PM	Rate (0)
jafarreihani Posts: 5 Rating: (0)	hello I think so. thanks
jafarreihani Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on