Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Track users' activities

Created by: hdhosseini at: 10/25/2010 5:15 PM (13 Replies)

Rating (6)

Thanks 12

Result pages:: |; 1 | 2; |

14 Entries

Entries per page: 10 | all

10/25/2010 5:15 PM	Rate (6)
hdhosseini Diamond Member Joined: 1/28/2009 Last visit: 10/26/2024 Posts: 6852 Rating: (1365)	Hi The attachment contains a WINCC project for logging users' activities.Some users defined , consider hdhosseini1 log in as a user , so you can see the active user in the static text and also an alarm will be generated to make us able to track users.Please consider this project as a rough demonstration. It will be improved.For each user ,one bit allocated . Looking forward to your feedbacks Attachment wincc_users.zip (2379 Downloads)
	Demo Channel on Youtube
Suggestion To thank Quote Answer
This contribution was helpful to 10 thankful Users Jaapie UMENCHO IBN-Service BilalD Alexey_Spb Kahl S7 AUTOMAN Tornes KCD Ilich_999

10/26/2010 9:18 AM	Rate (0)
BilalD Posts: 157 Rating: (10)	Thanks hdhosseini for that project, it was very useful for me Regards.
BilalD Posts: 157 Rating: (10)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users hdhosseini

11/10/2010 7:33 AM	Rate (0)
zmzm Posts: 28 Rating: (0)	HI Dear , Tanks for your attention ,now I have a problem,where are these functions?I mean from witch category can I found these c_Action functions ? thanks zmzm
zmzm Posts: 28 Rating: (0)
Suggestion To thank Quote Answer

11/10/2010 12:55 PM	Rate (0)
hdhosseini Diamond Member Joined: 1/28/2009 Last visit: 10/26/2024 Posts: 6852 Rating: (1365)	Hi zmzm If you just want to use the log in log out interface, copy the .pdl in your project and call it in your graphic editor.assign a button or a shortcut key for that , as it is done in the sample project.All C codes are done before and you just use it without any proble. regards
	Demo Channel on Youtube
Suggestion To thank Quote Answer

3/17/2011 9:18 AM	Rate (0)
lord.magnetica Posts: 133 Rating: (0)	Witch is the password for the user hdhosseini1 ? I can`t use this project if i don`t now the password. Thanks,
lord.magnetica Posts: 133 Rating: (0)
Suggestion To thank Quote Answer

3/17/2011 3:18 PM	Rate (0)
hdhosseini Diamond Member Joined: 1/28/2009 Last visit: 10/26/2024 Posts: 6852 Rating: (1365)	lord.magnetica Which is the password for the user hdhosseini1 ? I can`t use this project if i don`t now the password. Dear lord.magnetica Pass for both hdhosseini1 & hdhosseini2 is the same.It is (******). You can define your own user name and password and just change the username in the code. Check the program again and inform in case of any error. Best regards hdhosseini
	Last edited by: hdhosseini at: 6/24/2013 7:43 PM Demo Channel on Youtube
Suggestion To thank Quote Answer

3/18/2011 12:45 PM	Rate (0)
lord.magnetica Posts: 133 Rating: (0)	hdhosseini lord.magnetica Which is the password for the user hdhosseini1 ? I can`t use this project if i don`t now the password. Dear lord.magnetica Pass for both hdhosseini1 & hdhosseini2 is the same.It is (*****). You can define your own user name and password and just change the username in the code. Check the program again and inform in case of any error. Best regards hdhosseini Thanks , the password in working. Now i have an issue: I have created 4 user ( user1, user2, use3, and user4) with 4 different password. Also i created 4 alarm with userx login , and 4 alarm with userx logout The problem is that i cannot locate where is the code . Should i write your example code , in "global script --> c-editor -->actions --> global actions , and where appear "printf ("txt=%s\r\n",txt); if (strcmp(txt,"hdhosseini1*")) there to midify with user1 ??? p.s. in this moment only user hdhosseini1 is working , generating the alarm . I attached a picture with what i understant from you. :) i wish to make one code , and there to define the 4 user . where I'm wrong? Thanks, Attachment user login - generate alarm.jpg (1737 Downloads)
lord.magnetica Posts: 133 Rating: (0)	Last edited by: O_Moderator at: 6/25/2013 11:29 AM Last edited by: lord.magnetica at: 3/18/2011 12:48 PM
Suggestion To thank Quote Answer

3/18/2011 7:57 PM	Rate (0)
hdhosseini Diamond Member Joined: 1/28/2009 Last visit: 10/26/2024 Posts: 6852 Rating: (1365)	Dear lord.magnetica You just need to change the text assigned to each bit in WINCC's alarm editor.If you want to check 4 users, create corresponding log in and log out bits, Generate a text for each bit in WINCC's alarm editor and only modify the C codes to check all users. BR
	Demo Channel on Youtube
Suggestion To thank Quote Answer

3/21/2011 8:31 AM	Rate (0)
lord.magnetica Posts: 133 Rating: (0)	hdhosseini Dear lord.magnetica Generate a text for each bit in WINCC's alarm editor and only modify the C codes to check all users. BR Hy hdhosseini, i am not succes to realize this code. I have created the 4 user, corresponding login and logout bits, but where do you say to modify the CODE ??? I have open the project in original shape when you put it on the net date 10/25/2010 5:15 PM. I cannot find the code where you set the check user hdhosseini1 . Also on date 11.10.2010 user zmzm have this issue ( on this threat ). only hdhosseini1 user is working with the alarm , witch this mean that trere is a code who check this user , so where is it ? Coult you be more precisely in explanation . Please could you tell us there is this code ? p.s. i am using Wincc V7.0 SP1 . Excuse me if I expressed too direct but the idea is that i really need to do to work this problem. I attached a picture with what i understant until now, maibe you could take a look and teel my there i am doing wrong. Thanks in advance, Mihai Attachment hdhosseini forum.jpg (1085 Downloads)
lord.magnetica Posts: 133 Rating: (0)
Suggestion To thank Quote Answer

3/25/2011 11:11 AM	Rate (0)
lord.magnetica Posts: 133 Rating: (0)	Can anyone help me in this issue ? Does have someone o similar code ?
lord.magnetica Posts: 133 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

WinCC Scripting

Follow us on